Crankcase Pressure Sensor Replacement
Removal Procedure

    Object ID: 5628075
  1. Air Cleaner Outlet Duct Clamp(1)@Air Cleaner Outlet Front Duct(2)»LoosenAir Cleaner Outlet Duct
  2. Air Cleaner Outlet Front Duct(2)@Air Cleaner Outlet Duct»Remove

    3. Object ID: 5571687
  3. Plenum Front Panel Outer Reinforcement(1)»Remove—Plenum Front Panel Outer Reinforcement Removal and Installation

    4. Object ID: 5150241
  4. Air Cleaner Outlet Duct Clamp(1)»Loosen
  5. Air Cleaner Outlet Duct(2)»Remove

    6. Object ID: 5146733
  6. Disconnect the crankcase pressure sensor electrical connector.
  7. Crankcase Pressure Sensor Bolt(1)»Remove
  8. Crankcase Pressure Sensor(2)»Remove
Installation Procedure

    Object ID: 5146733

    Caution: Refer to Fastener Caution.

  1. Crankcase Pressure Sensor(2)»Install
  2. Crankcase Pressure Sensor Bolt(1)»Install and tighten—Fastener Specifications
  3. Connect the crankcase pressure sensor electrical connector.

    4. Object ID: 5150241
  4. Air Cleaner Outlet Duct(2)»Install

    5. Caution: Refer to Fastener Caution.

  5. Air Cleaner Outlet Duct Clamp(1)»Tighten—Fastener Specifications

    6. Object ID: 5571687
  6. Plenum Front Panel Outer Reinforcement(1)»Install—Plenum Front Panel Outer Reinforcement Removal and Installation

    7. Object ID: 5628075
  7. Air Cleaner Outlet Front Duct(2)@Air Cleaner Outlet Duct»Install
  8. Air Cleaner Outlet Duct Clamp(1)»Tighten—Fastener Specifications