Intake Air Pressure and Temperature Sensor Replacement

Removal Procedure


    Object ID: 5150211
  1. Air Cleaner Outlet Duct Clamp(1)»Loosen[2x]
  2. Air Cleaner Outlet Front Duct(2)»Remove
  3. Plenum Front Panel Outer Reinforcement»Remove—Plenum Front Panel Outer Reinforcement Removal and Installation

    4. Object ID: 5150241
  4. Air Cleaner Outlet Duct Clamp(1)»Loosen
  5. Air Cleaner Outlet Duct(2)»Remove

    6. Object ID: 5613883
  6. Disconnect the intake air pressure and temperature sensor electrical connector.
  7. Intake Air Pressure and Temperature Sensor Bolt(1)»Remove
  8. Intake Air Pressure and Temperature Sensor(2)»Remove

Installation Procedure


    Object ID: 5613883
  1. Intake Air Pressure and Temperature Sensor(2)»Install
  2. Intake Air Pressure and Temperature Sensor Bolt(1)»Install and tighten—Fastener Specifications
  3. Connect the intake air pressure and temperature sensor electrical connector.

    4. Object ID: 5150241

    Note: Ensure correct alignment of the air cleaner outlet duct tab. Correct alignment does not require excessive force.

  4. Air Cleaner Outlet Duct(2)»Install

    5. Caution: Refer to Fastener Caution.

  5. Air Cleaner Outlet Duct Clamp(1)»Tighten—Fastener Specifications
  6. Plenum Front Panel Outer Reinforcement»Install—Plenum Front Panel Outer Reinforcement Removal and Installation

    7. Object ID: 5150211
  7. Air Cleaner Outlet Front Duct(2)»Install
  8. Air Cleaner Outlet Duct Clamp(1)»Tighten[2x]—Fastener Specifications