Charge Air Cooler Air Temperature Sensor Replacement

Removal Procedure

  1. Oil Filler Cap»Remove

    2. Object ID: 5171779
  2. Intake Manifold Cover Bolt(1)»Remove
  3. Intake Manifold Cover(2)»Remove
  4. Install the oil filler cap after removal of the intake manifold cover to prevent debris from falling into the engine.

    5. Object ID: 5146427
  5. Disconnect the charge air cooler air temperature sensor electrical connector.
  6. Charge Air Cooler Air Temperature Sensor(1)»Remove

Installation Procedure


    Object ID: 5146427

    Caution: Refer to Component Fastener Tightening Caution.

  1. Charge Air Cooler Air Temperature Sensor(1)»Install and tighten—Fastener Specifications
  2. Connect the charge air cooler air temperature sensor electrical connector.
  3. Oil Filler Cap»Remove

    4. Object ID: 5171779
  4. Intake Manifold Cover(2)»Install
  5. Intake Manifold Cover Bolt(1)»Install and tighten—Fastener Specifications
  6. Oil Filler Cap»Install