Exhaust Temperature Sensor Replacement - Position 3
Removal Procedure

WarningExhaust Service Warning

  1. Intake Manifold Cover»Remove—Intake Manifold Cover Replacement

    2. Object ID: 4725900
  2. Electrical Connector(1)@Exhaust Temperature Sensor(2)»Disconnect
  3. Raise and support the vehicle.Lifting and Jacking the Vehicle

    4. Object ID: 4725906
  4. Exhaust Temperature Sensor(1)@Retainer(2)»Unclip

    5. Object ID: 4725911
  5. Exhaust Temperature Sensor(1)»Remove
Installation Procedure

    Object ID: 4725911

    CautionComponent Fastener Tightening Caution

  1. Exhaust Temperature Sensor(1)»Install and tighten45N·m(33 lb ft)

    2. Object ID: 4725906
  2. Exhaust Temperature Sensor(1)@Retainer(2)»Install
  3. Remove the supports and lower the vehicle.Lifting and Jacking the Vehicle

    4. Object ID: 4725900
  4. Electrical Connector(1)@Exhaust Temperature Sensor(2)»Connect
  5. Intake Manifold Cover»Install—Intake Manifold Cover Replacement
  6. If replacing, perform the exhaust gas temperature sensor reset. Exhaust Gas Temperature Sensor Reset
  7. If replacing, perform the NOx catalyst reductant loading reset. NOx Catalyst Reductant Loading Reset