Rear Electric Drive Transmission Module Coolant Extension Secondary Hose Replacement
Removal Procedure
  1. Drain the drive motor battery cooling system. Drive Motor Battery Cooling System Draining and Filling
  2. Raise and support the vehicle.Lifting and Jacking the Vehicle

    3. Object ID: 5920538
  3. Retainer Clip(3)@Front Electric Drive Transmission Module Hose(1)»Disengage
  4. Retainer Clip(3)@High Voltage Battery Coolant Pump Inlet Hose(2)»Disengage
  5. Front Electric Drive Transmission Module Hose(1)»Disconnect
  6. High Voltage Battery Coolant Pump Inlet Hose(2)»Disconnect
  7. Drive Motor Control Module Cooling Inlet Hose Bolt(4)»Remove

    8. Object ID: 6159708
  8. Rear Electric Drive Transmission Module Coolant Extension Secondary Hose Nut(2)»Remove[2x]

    9. Object ID: 5920674
  9. Retainer Clip(2)@Rear Electric Drive Transmission Module Coolant Extension Secondary Hose(1)»Disengage[2x]
  10. Rear Electric Drive Transmission Module Coolant Extension Secondary Hose(1)»Disconnect[2x]
  11. Rear Electric Drive Transmission Module Coolant Extension Secondary Hose(1)»Remove
Installation Procedure

    Object ID: 5920674
  1. Rear Electric Drive Transmission Module Coolant Extension Secondary Hose(1)»Install
  2. Rear Electric Drive Transmission Module Coolant Extension Secondary Hose(1)»Connect[2x]
  3. Retainer Clip(2)@Rear Electric Drive Transmission Module Coolant Extension Secondary Hose(1)»Engage[2x]

    4. Object ID: 6159708

    Caution: Refer to Fastener Caution.

  4. Rear Electric Drive Transmission Module Coolant Extension Secondary Hose Nut(2)»Install and tighten[2x]—Fastener Specifications

    5. Object ID: 5920538
  5. Drive Motor Control Module Cooling Inlet Hose Bolt(4)»Install and tighten—Fastener Specifications
  6. High Voltage Battery Coolant Pump Inlet Hose(2)»Connect
  7. Front Electric Drive Transmission Module Hose(1)»Connect
  8. Retainer Clip(3)@High Voltage Battery Coolant Pump Inlet Hose(2)»Engage
  9. Retainer Clip(3)@Front Electric Drive Transmission Module Hose(1)»Engage
  10. Remove the support and lower the vehicle.
  11. Fill the drive motor battery cooling system to the proper level. Drive Motor Battery Cooling System Draining and Filling