Accelerator Pedal Replacement

Removal Procedure


    Object ID: 5515684
  1. Instrument Panel Lower Insulator Retainer(1)»Remove[2x]

    2. Object ID: 5515685
  2. Instrument Panel Lower Trim Panel Insulator(1)»Remove

    3. Object ID: 5532243
  3. Disconnect the accelerator pedal electrical connector  (1).

    4. Object ID: 5528076
  4. Accelerator Pedal Nut(1)»Remove[2x]
  5. Accelerator Pedal(2)»Remove

Installation Procedure

Caution: When installing the Accelerator Pedal do NOT use a mallet or excessive force on the pedal assembly or damage to the pedal assembly could occur, requiring replacement of the pedal assembly.


    Object ID: 5528076
  1. Accelerator Pedal(2)»Install

    2. Caution: Refer to Fastener Caution.

  2. Accelerator Pedal Nut(1)»Install and tighten[2x]—Fastener Specifications

    3. Object ID: 5532243
  3. Connect the accelerator pedal electrical connector  (1).

    4. Object ID: 5515685
  4. Instrument Panel Lower Trim Panel Insulator(1)»Install

    5. Object ID: 5515684
  5. Instrument Panel Lower Insulator Retainer(1)»Install[2x]