Service Information
2020 GMC Terrain
|
Equinox, Terrain Service Manual (N America, Israel, MidEast - except Central America/Caribbean) (13286553)
|
Document ID: 5286307
Generator Replacement (LYX)
Removal Procedure
Disconnect the battery negative cable.
Battery Negative Cable Disconnection and Connection
Drive Belt»Remove—
Drive Belt Replacement
Generator Shield(2)»Remove—
Generator Shield Replacement
Raise and support the vehicle.
Lifting and Jacking the Vehicle
Generator Nut(3)»Remove
Battery Positive Cable Nut(2)»Remove
Starter Solenoid Cable(1)»Remove
Generator Bolt(4)»Remove
Lower the vehicle.
Generator Nut(2)»Remove
Electrical Connector(3)»Disconnect
If necessary, remove the generator mounting stud (1).
Generator(4)»Remove
Installation Procedure
Generator(4)»Install
Caution:
Refer to
Fastener Caution
If previously removed, install and tighten the generator mounting stud to
9 N·m (80 lb in)
.
Generator Nut(2)»Install and tighten
22N·m(16 lb ft)
Electrical Connector(3)»Connect
Raise and support the vehicle.
Lifting and Jacking the Vehicle
Generator Bolt(4)»Install and tighten
22N·m(16 lb ft)
Starter Solenoid Cable(1)»Install
Battery Positive Cable Nut(2)@Starter Solenoid»Install and tighten
15 N·m (11 lb ft)
Generator Nut(3)»Install and tighten
22N·m(16 lb ft)
Lower the vehicle.
Generator Shield(2)»Install—
Generator Shield Replacement
Drive Belt»Install—
Drive Belt Replacement
Connect the negative battery cable.
Battery Negative Cable Disconnection and Connection
© General Motors, All rights reserved.