| Last Modified: 12-11-2024 | 6.11:8.1.0 | Doc ID: RM100000002Q1BW |
| Model Year Start: 2025 | Model: GR Corolla | Prod Date Range: [09/2024 - ] |
| Title: G16E-GTS (ENGINE MECHANICAL): FRONT CRANKSHAFT OIL SEAL: REMOVAL; 2025 MY GR Corolla [09/2024 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE FRONT WHEEL RH
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
3. REMOVE REAR ENGINE UNDER COVER RH
Click here
4. REMOVE FRONT BUMPER ASSEMBLY
Click here
5. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
Click here
6. REMOVE PIN HOLD CLIP
Click here
7. REMOVE FRONT FENDER LINER RETAINER
Click here
8. DRAIN WASHER FLUID
Click here
9. REMOVE SUB RADIATOR ASSEMBLY WITH SUB RADIATOR DUCT (w/ Sub Radiator)
Click here
10. REMOVE INLET HOSE
Click here
11. REMOVE WINDSHIELD WASHER JAR ASSEMBLY
Click here
12. REMOVE NO. 2 ENGINE UNDER COVER AIR GUIDE
Click here
13. REMOVE FAN AND GENERATOR V BELT
Click here
14. REMOVE CRANKSHAFT PULLEY ASSEMBLY
Click here
15. REMOVE TIMING CHAIN COVER OIL SEAL
|
(a) Using a screwdriver, pry out the timing chain cover oil seal. NOTICE: Do not damage the surface of the timing chain cover oil seal press fit hole or the crankshaft. HINT: Tape the screwdriver tip before use. |
|
|
|