Last Modified: 12-11-2024 |
6.11:8.1.0 |
Doc ID: RM100000002PY8M |
Model Year Start: 2025 |
Model: GR Corolla |
Prod Date Range: [09/2024 -
] |
Title: G16E-GTS (ENGINE CONTROL): SFI SYSTEM: U115C87; Lost Communication with ECM/PCM "A" (ch5) Missing Message; 2025 MY GR Corolla [09/2024 - ] |
DTC
|
U115C87
|
Lost Communication with ECM/PCM "A" (ch5) Missing Message
|
DESCRIPTION
The ECM and skid control ECU (brake actuator assembly) transmit and receive date via CAN communication.
Detection overview
If a communication error occurs between the ECM and skid control ECU (brake actuator assembly), the ECM stores this DTC.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
MIL
|
DTC Output from
|
Priority
|
Note
|
U115C87
|
Lost Communication with ECM/PCM "A" (ch5) Missing Message
|
Diagnostic condition:
Abnormal condition:
-
There is no communication between the ECM and skid control ECU (brake actuator assembly).
Abnormal period:
Number of trips:
Detection method:
Sensors/component parts used for detection:
|
-
Wire harness or connector
-
Skid control ECU (brake actuator assembly)
-
ECM
|
Does not come on
|
Engine
|
B
|
SAE Code: U115C
|
CONFIRMATION DRIVING PATTERN
By performing a confirmation drive, you can confirm the reoccurrence of DTC.
-
Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
-
Turn the ignition switch off and wait for at least 30 seconds.
-
Turn the ignition switch to ON and wait for 5 seconds or more.
-
Enter the following menus: Powertrain / Engine / Trouble Codes.
HINT:
-
If a pending DTC is output, the system is malfunctioning.
-
If a pending DTC is not output, perform the following procedure.
-
Enter the following menus: Powertrain / Engine / Utility / All Readiness.
-
Input the DTC: U115C87.
-
Check the DTC judgment result.
HINT:
-
If the judgment result shows NORMAL, the system is normal.
-
If the judgment result shows ABNORMAL, the system is malfunctioning.
PROCEDURE
1.
|
GO TO CAN COMMUNICATION SYSTEM
|
Click here
NEXT |
|
END
|
|