| Last Modified: 12-11-2024 | 6.11:8.1.0 | Doc ID: RM100000002PVNV |
| Model Year Start: 2025 | Model: GR Corolla | Prod Date Range: [09/2024 - ] |
| Title: EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): MANUAL TRANSAXLE OIL: ON-VEHICLE INSPECTION; 2025 MY Corolla Corolla Hatchback GR Corolla [09/2024 - ] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
![2025 MY GR Corolla [09/2024 - ]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
Click here
3. REMOVE PIN HOLD CLIP
Click here
4. REMOVE FRONT FENDER LINER RETAINER
Click here
5. REMOVE NO. 3 ENGINE UNDER COVER AIR GUIDE
Click here
6. REMOVE REAR ENGINE UNDER COVER LH
Click here
7. INSPECT MANUAL TRANSAXLE OIL
|
(a) Remove the manual transmission filler plug and gasket. |
|
|
(b) Check that the oil surface is between 0 to 5 mm (0 to 0.197 in.) from the bottom lip of the manual transmission filler plug opening. NOTICE: An excessively large or small amount of manual transaxle oil may cause problems. |
|
(c) Check for oil leakage when the oil level is low.
|
(d) Install a new gasket and the manual transmission filler plug. Torque: 39.2 N·m {400 kgf·cm, 29 ft·lbf} |
|
8. INSTALL REAR ENGINE UNDER COVER LH
Click here
9. INSTALL NO. 3 ENGINE UNDER COVER AIR GUIDE
Click here
10. INSTALL FRONT FENDER LINER RETAINER
Click here
11. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
Click here
12. INSTALL PIN HOLD CLIP
Click here
13. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
|
|