| Last Modified: 12-11-2024 | 6.11:8.1.0 | Doc ID: RM100000002PTYW |
| Model Year Start: 2025 | Model: GR Corolla | Prod Date Range: [09/2024 - ] |
| Title: PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front Side): INSTALLATION; 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2024 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL ULTRASONIC SENSOR CUSHION SET
HINT:
Only perform this procedure when removing and installing the ultrasonic sensor cushion set.
(a) Install the ultrasonic sensor cushion set as shown in the illustration.
|
Install in this Direction |
- |
- |
2. INSTALL FRONT CORNER ULTRASONIC SENSOR
HINT:
The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.
(a) Engage the 2 claws to install the front corner ultrasonic sensor as shown in the illustration.
|
|
Install in this Direction |
(b) Connect the connector.
3. INSTALL FRONT CENTER ULTRASONIC SENSOR
HINT:
The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.
(a) Engage the 2 claws to install the front center ultrasonic sensor as shown in the illustration.
|
|
Install in this Direction |
(b) Connect the connector.
4. INSTALL NO. 3 RADIATOR TO SUPPORT SEAL
Click here
![2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2024 - ]; EXTERIOR PANELS / TRIM: FRONT BUMPER (for Hatchback, GR): REASSEMBLY+](/t3Portal/stylegraphics/info.gif)
5. INSTALL NO. 2 RADIATOR TO SUPPORT SEAL
HINT:
Use the same procedure as for the No. 3 radiator to support seal.
6. INSTALL FRONT BUMPER ASSEMBLY
Click here
7. PERFORM CALIBRATION
Click here
SST: 09989-00020
|
|