- Back door opener
| Last Modified: 12-11-2024 | 6.11:8.1.0 | Doc ID: RM100000002PR82 |
| Model Year Start: 2025 | Model: GR Corolla | Prod Date Range: [09/2024 - ] |
| Title: AUDIO / VIDEO: ACTIVE NOISE CONTROL ECU (w/o Stereo Component Amplifier): REMOVAL; 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2024 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during stereo component equalizer assembly removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedures |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
Stereo Component Equalizer Assembly |
ECU configuration |
- |
|
CAUTION:
Be sure to read Precaution thoroughly before servicing.
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: PRECAUTION](/t3Portal/stylegraphics/info.gif)
NOTICE:
After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Click here
HINT:
When the cable is disconnected / reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
Learning completes when vehicle is driven
|
Effect/Inoperative Function When Necessary Procedures are not Performed |
Necessary Procedures |
Link |
|---|---|---|
|
Front Camera System |
Drive the vehicle straight ahead at 35 km/h (22 mph) or more for 5 seconds or more. |
|
Learning completes when vehicle is operated normally
|
Effect/Inoperative Function When Necessary Procedures are not Performed |
Necessary Procedures |
Link |
|---|---|---|
|
Power Door Lock Control System |
Perform door unlock operation with door control switch or electrical key transmitter sub-assembly switch. |
|
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY LH
Click here
2. REMOVE AUDIO AMPLIFIER COVER
(a) Pull the audio amplifier cover in the direction indicated by the arrow (1) shown in the illustration to disengage the 2 clips.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
(b) Pull the audio amplifier cover in the direction indicated by the arrow (2) shown in the illustration to disengage the guide and remove the audio amplifier cover.
3. REMOVE STEREO COMPONENT EQUALIZER ASSEMBLY WITH BRACKET
|
(a) Disengage the clamp. |
|
(b) Disconnect the 2 connectors.
|
(c) Remove the 2 bolts and stereo component equalizer assembly with bracket. |
|
4. REMOVE NO. 1 EQUALIZER STEREO COMPONENT BRACKET
|
(a) Remove the 2 screws and No. 1 equalizer stereo component bracket. |
|
5. REMOVE NO. 2 EQUALIZER STEREO COMPONENT BRACKET
|
(a) Remove the 2 screws and No. 2 equalizer stereo component bracket. |
|
6. REMOVE STEREO COMPONENT EQUALIZER ASSEMBLY
|
|