|
Last Modified: 01-27-2025 |
6.11:8.1.0 |
Doc ID: RM100000002PN1W |
|
Model Year Start: 2025 |
Model: GR Corolla |
Prod Date Range: [09/2024 -
] |
|
Title: WIPER / WASHER: WASHER MOTOR: REMOVAL; 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2024 - ] |
REMOVAL
PROCEDURE
1. REMOVE FRONT WHEEL RH
Click here
2. REMOVE FRONT FENDER LINER RH (for Hatchback)
(a) except GR:
(1) As shown in the illustration, pull the front bumper assembly horizontally to release each claw and disengage the front fender liner retainer.
|
Remove in this Direction (1)
|
|
Remove in this Direction (2)
|
|
(2) Remove the clip and 3 screws.
|
|
|
(3) Remove the 2 grommets and 5 screws.
|
|
|
(4) Remove the 8 clips and front fender liner RH.
|
|
(b) for GR:
|
(1) Using a screwdriver with its tip wrapped withprotective tape, disengage the claw as shownin the illustration.
|
|
|
(2) Remove the 2 clips and 3 screws.
|
|
|
(3) Remove the 2 grommets and 6 screws.
|
|
|
(4) Remove the 9 clips and front fender liner RH.
|
|
3. REMOVE FRONT FENDER LINER RH (for Sedan)
(a) As shown in the illustration, pull the front bumper assembly horizontally to release each claw and disengage the front fender liner retainer.
|
Remove in this Direction (1)
|
|
Remove in this Direction (2)
|
|
(b) Remove the 2 clips and 3 screws.
|
|
|
(c) Remove the 2 grommets and 5 screws.
|
|
|
(d) Remove the 8 clips and front fender liner RH.
|
|
4. REMOVE PIN HOLD CLIP (for GR)
|
Remove in this Direction
|
(a) Disengage the 2 claws to remove the pin holdclip as shown in the illustration.
5. REMOVE FRONT FENDER LINER RETAINER (for GR)
HINT:
Use the same procedure as for the LH side.
Click here
6. DRAIN WASHER FLUID (for Hatchback)
|
(a) Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.
HINT:
Use a container to collect the washer fluid.
|
|
7. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (for Hatchback)
(a) Disconnect the connector and washer hose.
|
Remove in this Direction
|
(b) Remove the windshield washer motor and pump assembly as shown in the illustration.
8. DRAIN WASHER FLUID (for Sedan)
|
(a) Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.
HINT:
Use a container to collect the washer fluid.
|
|
9. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (for Sedan)
(a) Disconnect the connector.
|
Remove in this Direction
|
(b) Remove the windshield washer motor and pump assembly as shown in the illustration.
10. REMOVE WINDSHIELD WASHER JAR BUSH
|
(a) Remove the windshield washer jar bush from the washer jar.
|
|
|