GF1A (TRANSFER / 4WD / AWD): TRANSFER ASSEMBLY: INSTALLATION; 2025 MY Corolla Corolla Hatchback GR Corolla [09/2024

Last Modified: 12-11-2024	6.11:8.1.0	Doc ID: RM100000002P84R
Model Year Start: 2025	Model: GR Corolla	Prod Date Range: [09/2024 - ]
Title: GF1A (TRANSFER / 4WD / AWD): TRANSFER ASSEMBLY: INSTALLATION; 2025 MY Corolla Corolla Hatchback GR Corolla [09/2024 - ]

INSTALLATION

1. INSTALL TRANSFER AND TRANSAXLE SETTING STUD BOLT (for Type A)

(a) Clean the transfer and transaxle setting stud bolt holes.

(b) Using 2 nuts, install 2 new transfer and transaxle setting stud bolts to the transaxle assembly at the positions shown in the illustration.

Torque:

39.2 N·m {400 kgf·cm, 29 ft·lbf}

NOTICE:

Install the sealed side of the transfer and transaxle setting stud bolt to the transaxle assembly.

2. TEMPORARILY INSTALL TRANSFER ASSEMBLY (for EA67F)

Click here

3. INSTALL MANUAL TRANSAXLE ASSEMBLY (for EA67F)

Click here

4. INSTALL TRANSFER ASSEMBLY

(a) Using SST and union nut wrench, install the transfer assembly to the transaxle with the 8 nuts.

Union Nut Wrench

Torque Wrench Fulcrum Length

Torque:

Specified tightening torque :

68.6 N·m {700 kgf·cm, 51 ft·lbf}

SST: 09961-00950

HINT:

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click here
When using a union nut wrench (fulcrum length of 30 mm (1.181 in.)) + SST (fulcrum length of 150 mm (5.906 in.)) + torque wrench (fulcrum length of 255 mm (10.039 in.)): 40.2 N*m (410 kgf*cm, 30 ft.*lbf)

5. INSTALL EXHAUST PIPE SUPPORT STAY (for UC80F)

Click here

6. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (for UC80F)

Click here

7. INSTALL MANUAL TRANSAXLE ASSEMBLY (for EA67F)

Click here

8. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click here