Last Modified: 12-11-2024 |
6.11:8.1.0 |
Doc ID: RM100000002OV04 |
Model Year Start: 2025 |
Model: GR Corolla |
Prod Date Range: [09/2024 -
] |
Title: UC80F (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT PADDLE SWITCH: REMOVAL; 2025 MY Corolla Corolla Hatchback GR Corolla [09/2024 - ] |
REMOVAL
CAUTION / NOTICE / HINT
HINT:
When the cable is disconnected / reconnected to the battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
Learning completes when vehicle is driven
Effect/Inoperative Function when Necessary Procedure not Performed
|
Necessary Procedure
|
Link
|
Front Camera System
|
Drive the vehicle straight ahead at 35 km/h (22 mph) or more for 5 seconds or more.
|
|
Learning completes when vehicle is operated normally
Effect/Inoperative Function when Necessary Procedure not Performed
|
Necessary Procedure
|
Link
|
Power Door Lock Control System
|
Perform door unlock operation with door control switch or electrical key transmitter sub-assembly switch.
|
|
PROCEDURE
1. REMOVE STEERING WHEEL ASSEMBLY
Click here
2. REMOVE NO. 1 STEERING WHEEL ORNAMENT
Click here
3. REMOVE STEERING PAD SWITCH ASSEMBLY
Click here
4. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)
(a) Remove the 2 screws and disengage the 2 guides to disconnect the 2 shift paddle switches (transmission shift switch assemblies) from the steering wheel assembly.
|
|
(b) Disengage the 4 guides to remove the 2 shift paddle switches (transmission shift switch assemblies) with No. 1 switch wire from the steering wheel assembly.
|
|
(c) Disconnect the No. 1 transmission shift switch assembly connector and No. 2 transmission shift switch assembly connector to remove the No. 1 transmission shift switch assembly and No. 2 transmission shift switch assembly from the No. 1 switch wire.
|
|
*1
|
No. 1 Transmission Shift Switch Assembly
|
*2
|
No. 2 Transmission Shift Switch Assembly
|
|
|
|