Last Modified: 12-11-2024 6.11:8.1.0 Doc ID: RM100000002OUZO
Model Year Start: 2025 Model: GR Corolla Prod Date Range: [09/2024 -           ]
Title: UC80F (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT LEVER: REMOVAL; 2025 MY Corolla Corolla Hatchback GR Corolla [09/2024 -        ]

REMOVAL

PROCEDURE

1. SECURE VEHICLE

(a) Fully apply the parking brake and chock a wheel.

CAUTION:

  • Make sure to apply the parking brake and chock a wheel before performing this procedure.
  • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

2. REMOVE SHIFT LOCK RELEASE BUTTON COVER

(a) Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws to remove the shift lock release button cover from the position indicator housing assembly.

NOTICE:

Be careful not to damage the shift lock release button cover and position indicator housing assembly.

*a

Protective Tape

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

Click here 2025 MY Corolla Corolla Hatchback GR Corolla [09/2024 -        ]; UC80F (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT LEVER KNOB: REMOVAL+

4. REMOVE CONSOLE BOX ASSEMBLY

Click here 2025 MY GR Corolla [09/2024 -        ]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (for G16E-GTS): REMOVAL

5. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Move the shift lever to N.

(b) Disconnect the transmission control cable assembly from the transmission floor shift assembly.

(c) Rotate the lock nut counterclockwise approximately 180° and, while holding the lock nut in that position, disconnect the transmission control cable assembly from the transmission floor shift assembly.

NOTICE:

Do not forcibly pull the transmission control cable assembly into the cabin.

*a

Lock Nut

*b

Counterclockwise

6. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

(a) Remove the 4 bolts and separate the transmission floor shift assembly.

(b) Disconnect the transmission control switch connector.

(c) Disengage the 3 clamps to separate the wire harness from the transmission floor shift assembly.

(d) Disconnect the shift lock control ECU connector.

(e) Disengage the 2 clamps to separate the wire harness from the transmission floor shift assembly.

(f) Remove the transmission floor shift assembly.