| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000002D8A1 |
| Model Year Start: 2024 | Model: GR Corolla | Prod Date Range: [08/2023 - ] |
| Title: PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: CUSTOMIZE PARAMETERS; 2024 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [08/2023 - ] | ||
CUSTOMIZE PARAMETERS
CUSTOMIZE INTUITIVE PARKING ASSIST SYSTEM
(a) Customizing with the GTS
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(1) Select the setting by referring to the table below.
Clearance Warning
|
Tester Display |
Description |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
Ultrasonic Sensor (Front Center) Detection Range |
Sets the detection range of the ultrasonic sensor (front center). |
Far |
$00:Close,$01:Far |
Clearance warning ECU assembly |
|
Ultrasonic Sensor (Front Corner) Detection Range |
Sets the detection range of the ultrasonic sensor (front corner). |
Far |
$00:Close,$01:Far |
Clearance warning ECU assembly |
|
PKSA (O) Forward Detection Image Display |
Sets whether to show the clearance sonar function detection status on the display, when an obstacle is detected while driving the vehicle forward. |
Display |
$01:Display,$03:Hide |
Clearance warning ECU assembly |
|
Ultrasonic Sensor Actuation (Shift N) |
Turns ultrasonic sensor operation ON/OFF when shift position is in N. |
ON |
$00:OFF,$01:ON |
Clearance warning ECU assembly |
|
PKSA (O) Switch State Stored |
Sets whether to store the clearance sonar function main switch status (ON/OFF). |
Stored |
$00:Not Stored,$01:Stored |
Clearance warning ECU assembly |
|
PKSA (O) Judgment of Obstacle on Course |
Within the conditions of the automatic mute function, sets whether the automatic mute function can be enabled in the following situation (An object is not in the path of the vehicle) |
Valid |
$00:Valid,$01:Invalid |
Clearance warning ECU assembly |
|
PKSA (O) Auto Mute Function |
Turns the function that mutes the clearance sonar function warning sound ON/OFF, when conditions are met. |
ON |
$00:ON,$01:OFF |
Clearance warning ECU assembly |
|
PKSA (O) Image Display when Away from the Obstacle |
Sets whether to display the clearance sonar function detection status while the vehicle is moving away from an obstacle |
Display |
$00:Hide,$01:Display |
Clearance warning ECU assembly |
|
Ultrasonic Sensor (Side) Alarm Function |
Sets the ultrasonic sensor (side) alarm function ON/OFF.*1 |
ON |
$00:OFF,$01:ON |
Clearance warning ECU assembly |
|
Ultrasonic Sensor (Side) Alarm Detection Range |
Sets the notification distance of the ultrasonic sensor (side) alarm.*1 |
Far |
$00:Close,$01:Far |
Clearance warning ECU assembly |
|
Voice Guidance Function |
Turns the speech guidance function ON/OFF.*2 |
ON |
$00:OFF,$01:ON |
Clearance warning ECU assembly |
|
Clearance Warning Buzzer Volume |
Sets the volume of the clearance warning buzzer |
Volume 2 |
$01:Volume1,$02:Volume2,$03:Volume3 |
Clearance warning ECU assembly |
|
PKSA (O) Main Switch |
Switches the PKSA (O) function on and off. |
ON |
$00:OFF,$01:ON |
Clearance warning ECU assembly |
- *1: Although this function is displayed for vehicles not equipped with advanced park, it cannot be set.
- *2: This function is also displayed for models without Voice Guidance Function, but cannot be used.
Driver 1
|
Tester Display |
Description |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
Clearance Warning Buzzer Volume |
Sets the volume of the clearance warning buzzer |
Volume 2 |
$01:Volume1,$02:Volume2,$03:Volume3 |
Clearance warning ECU assembly |
|
Clearance Warning Buzzer Surround |
Sets the surround of the clearance warning buzzer* |
ON |
$00:OFF,$01:ON |
Clearance warning ECU assembly |
|
PKSA (O) Main Switch |
Switches the PKSA (O) function on and off. |
ON |
$00:OFF,$01:ON |
Clearance warning ECU assembly |
- *: This function is also displayed, but cannot be used.
Driver 2
|
Tester Display |
Description |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
Clearance Warning Buzzer Volume |
Sets the volume of the clearance warning buzzer |
Volume 2 |
$01:Volume1,$02:Volume2,$03:Volume3 |
Clearance warning ECU assembly |
|
Clearance Warning Buzzer Surround |
Sets the surround of the clearance warning buzzer* |
ON |
$00:OFF,$01:ON |
Clearance warning ECU assembly |
|
PKSA (O) Main Switch |
Switches the PKSA (O) function on and off. |
ON |
$00:OFF,$01:ON |
Clearance warning ECU assembly |
- *: This function is also displayed, but cannot be used.
Driver 3
|
Tester Display |
Description |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
Clearance Warning Buzzer Volume |
Sets the volume of the clearance warning buzzer |
Volume 2 |
$01:Volume1,$02:Volume2,$03:Volume3 |
Clearance warning ECU assembly |
|
Clearance Warning Buzzer Surround |
Sets the surround of the clearance warning buzzer* |
ON |
$00:OFF,$01:ON |
Clearance warning ECU assembly |
|
PKSA (O) Main Switch |
Switches the PKSA (O) function on and off. |
ON |
$00:OFF,$01:ON |
Clearance warning ECU assembly |
- *: This function is also displayed, but cannot be used.
Guest
|
Tester Display |
Description |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
Clearance Warning Buzzer Volume |
Sets the volume of the clearance warning buzzer |
Volume 2 |
$01:Volume1,$02:Volume2,$03:Volume3 |
Clearance warning ECU assembly |
|
Clearance Warning Buzzer Surround |
Sets the surround of the clearance warning buzzer* |
ON |
$00:OFF,$01:ON |
Clearance warning ECU assembly |
|
PKSA (O) Main Switch |
Switches the PKSA (O) function on and off. |
ON |
$00:OFF,$01:ON |
Clearance warning ECU assembly |
- *: This function is also displayed, but cannot be used.
|
|