Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000002D8A0 |
Model Year Start: 2024 |
Model: GR Corolla |
Prod Date Range: [08/2023 -
] |
Title: PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2024 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [08/2023 - ] |
HOW TO PROCEED WITH TROUBLESHOOTING
|
CAUTION / NOTICE / HINT
HINT:
-
Use the following procedure to troubleshoot the intuitive parking assist system.
-
*: Use the GTS.
PROCEDURE
1.
|
VEHICLE BROUGHT TO WORKSHOP
|
NEXT
|
|
|
2.
|
CUSTOMER PROBLEM ANALYSIS
|
NEXT
|
|
|
3.
|
INSPECT AUXILIARY BATTERY VOLTAGE
|
(a) Measure the auxiliary battery voltage with the ignition switch off.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, replace or recharge the auxiliary battery before proceeding to the next step.
NEXT
|
|
|
4.
|
CHECK CAN COMMUNICATION SYSTEM*
|
(a) Use the GTS to check if the CAN communication system is functioning normally.
-
Click here
Result
|
Proceed to
|
CAN communication system DTCs are not output
|
A
|
CAN communication system DTCs are output
|
B
|
A
|
|
|
(a) Check the vehicle specifications.
NEXT
|
|
|
6.
|
PROBLEM SYMPTOM CONFIRMATION
|
NEXT
|
|
|
(a) Check for DTCs and note any codes that are output.
Body Electrical > Clearance Warning > Trouble Codes
(b) Clear the DTCs.
Body Electrical > Clearance Warning > Clear DTCs
(c) Check for DTCs.
Body Electrical > Clearance Warning > Trouble Codes
Result
|
Proceed to
|
DTCs are output
|
A
|
DTCs are not output
|
B
|
A
|
|
|
8.
|
DIAGNOSTIC TROUBLE CODE CHART (INTUITIVE PARKING ASSIST SYSTEM)
|
(a) Refer to Diagnostic Trouble Code Chart.
Click here
9.
|
CHECK FOR VEHICLE CONTROL HISTORY*
|
HINT:
Refer to Vehicle Control History.
Click here
(a) Check for vehicle control history and note any codes that are output.
Body Electrical > Clearance Warning > Utility
Tester Display
|
Vehicle Control History (RoB)
|
Result
|
Proceed to
|
No vehicle control history is output (Problem symptom does not occur)
|
A
|
No vehicle control history is output (Problem symptom occurs)
|
B
|
X20C0 or X20C1 is output
|
C
|
Any vehicle control history other than X20C0 and X20C1 is output
|
D
|
A
|
|
|
(a) Refer to Symptom Simulation.
Click here
NEXT
|
|
|
11.
|
PROBLEM SYMPTOMS TABLE
|
(a) Refer to Problem Symptoms Table.
Click here
Result
|
Proceed to
|
Fault is not listed in Problem Symptoms Table
|
A
|
Fault is listed in Problem Symptoms Table
|
B
|
A
|
|
|
12.
|
OVERALL ANALYSIS AND TROUBLESHOOTING*
|
(a) Terminals of ECU
Click here
(b) Data List / Active Test
Click here
NEXT
|
|
|
NEXT
|
|
|
14.
|
IDENTIFICATION OF PROBLEM
|
NEXT
|
|
|
NEXT
|
|
|
NEXT |
|
END
|
|