| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000002BB30 |
| Model Year Start: 2023 | Model: Corolla Hatchback | Prod Date Range: [03/2023 - ] |
| Title: K120 / K121 (CVT): TRANSMISSION CONTROL CABLE (for TMC Made): INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback [03/2023 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL FLOOR SHIFT TRANSMISSION CONTROL SELECT CABLE
NOTICE:
Before installing the floor shift transmission control select cable, check that the shift lever is in N.
(a) for K120:
(1) Turn the transmission control shaft lever clockwise until it stops, then turn it counterclockwise 2 notches.
|
*a |
N |
NOTICE:
If the transmission control shaft lever is turned counterclockwise more than necessary, manual valve link lever sub-assembly may separate from the manual valve.
|
*1 |
Transmission Control Shaft Lever |
|
*a |
Manual Valve Link Lever Sub-assembly |
|
*b |
Manual Valve |
(b) for K121:
|
(1) Turn the transmission control shaft lever clockwise until it stops, then turn it counterclockwise 2 notches. |
|
(c) Pass the floor shift transmission control select cable into the vehicle and install the floor shift transmission control select cable to the vehicle body with the 2 nuts.
Torque:
6.0 N·m {61 kgf·cm, 53 in·lbf}
(d) Connect the floor shift transmission control select cable to vehicle body with the nut.
Torque:
6.0 N·m {61 kgf·cm, 53 in·lbf}
(e) Connect the floor shift transmission control select cable to the No. 1 transmission control cable bracket with a new clip.
|
(f) Connect the floor shift transmission control select cable to the transmission control shaft lever as shown in the illustration. |
|
|
(g) Slide the adjuster case cover in the direction shown by the arrow. |
|
|
(h) Using a precision screwdriver, pull out the lock piece of the adjuster case. |
|
|
(i) Turn the lock nut of the floor shift transmission control select cable counterclockwise. While holding the lock nut, push in the stopper. |
|
|
(j) Connect the floor shift transmission control select cable to the transmission floor shift assembly. NOTICE:
|
|
|
(k) Connect the floor shift transmission control select cable to the transmission floor shift assembly. NOTICE:
|
|
(l) Push in the lock piece of the adjuster case to lock it.
|
*a |
Push in |
|
*b |
Lock Piece |
|
*c |
Adjuster Case |
NOTICE:
-
When pushing in the lock piece of the adjuster case to lock it, remove your hand from the lever shaft.
*1
Floor Shift Transmission Control Select Cable
*a
Lever Shaft
- When pushing in the lock piece of the adjuster case to lock it, do not move the lever shaft or floor shift transmission control select cable forward or backward.
|
(m) Move the adjuster case cover in the direction shown by the arrow. NOTICE: If the adjuster case cover is not moved far enough so that the adjuster case cover engages the lock piece, the floor shift transmission control select cable will not be able to lock, and reliable shift operation will not be possible. |
|
2. INSTALL CONSOLE BOX ASSEMBLY
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV [11/2022 - ]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (except G16E-GTS): INSTALLATION](/t3Portal/stylegraphics/info.gif)
3. INSTALL FRONT NO. 1 FLOOR HEAT INSULATOR
(a) Install the front No. 1 floor heat insulator to the vehicle body with the 3 nuts.
Torque:
5.0 N·m {51 kgf·cm, 44 in·lbf}
4. INSTALL FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)
Click here
5. INSTALL FRONT FLOOR CENTER BRACE
Click here
6. INSTALL FRONT FLOOR COVER LH
Click here
7. INSTALL FRONT FLOOR COVER RH
Click here
8. INSTALL BATTERY CLAMP SUB-ASSEMBLY
Click here
9. INSTALL ECM
Click here
10. INSTALL BATTERY
Click here
11. INSPECT SHIFT LEVER POSITION
Click here
12. ADJUST SHIFT LEVER POSITION
Click here
13. INSPECT FOR EXHAUST GAS LEAK
Click here
|
|