Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM100000002B0TW
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [03/2023 -           ]
Title: TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING VALVE: REMOVAL; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2023 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during tire pressure warning valve and transmitter removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced (for HV Model)

Replacement Part or Procedure

Necessary Procedures

Effects/Inoperative when not Performed

Link

Tire pressure warning valve and transmitter
  • ID Registration
  • Initialization
  • Tire Position Identification

Tire Pressure Warning System

2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM (for HV Model): PRECAUTION

Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)

Replacement Part or Procedure

Necessary Procedures

Effects/Inoperative when not Performed

Link

Tire pressure warning valve and transmitter
  • ID Registration
  • Initialization
  • Tire Position Identification

Tire Pressure Warning System

2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]; TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM (for Gasoline Model (for Type B)): PRECAUTION

Tire

ECU Data Initialization (When performing tire replacement after RoB code X2104 is output)

Active Torque Split AWD System

2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; GF1A (TRANSFER / 4WD / AWD): ACTIVE TORQUE SPLIT AWD SYSTEM: CALIBRATION

PROCEDURE

1. REMOVE WHEEL ASSEMBLY

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL

2. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER (for G16E-GTS)

(a) Remove the tire valve cap.

NOTICE:

Keep the removed tire valve cap.

(b) Remove the valve core to release the air from the tire.

NOTICE:

Make sure that a sufficient amount of air has been released.

(c) Using a 11 mm deep socket wrench, remove the nut and washer.

(d) Drop the tire pressure warning valve and transmitter with grommet into the tire.

HINT:

The grommet may remain attached to the rim.

(e) Using a tire remover, remove the tire from the disc wheel.

NOTICE:

  • Be careful not to damage the tire pressure warning valve and transmitter due to interference between the valve and the tire bead.
  • Set the tire remover shoe as shown in the illustration.

*1

Tire

*a

Shoe

*b

10 to 20 mm (0.394 to 0.787 in.)

(f) Take out the tire pressure warning valve and transmitter with grommet from the tire.

(g) Remove the grommet from the tire pressure warning valve and transmitter.

(h) Using a T10 "TORX" driver, remove the bolt and tire pressure monitor sensor from the tubeless tire valve.

3. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER (except G16E-GTS)

(a) Remove the tire valve cap.

NOTICE:

Keep the removed tire valve cap.

(b) Remove the valve core to release the air from the tire.

NOTICE:

Make sure that a sufficient amount of air has been released.

(c) Using a tire remover, remove the tire from the disc wheel.

NOTICE:

  • Be careful not to damage the tire pressure warning valve and transmitter due to interference between the valve and the tire bead.
  • Set the tire remover shoe as shown in the illustration.

*1

Tire

*a

Shoe

*b

10 to 20 mm (0.394 to 0.787 in.)

(d) Using a T10 "TORX" driver, remove the bolt and tire pressure monitor sensor from the tubeless tire valve.

(e) Cut the tubeless tire valve and remove it by pulling from the outer side of the disc wheel as shown in the illustration.

*1

Tubeless Tire Valve

Cutting Area