Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000002AYX3 |
Model Year Start: 2023 |
Model: Corolla Hatchback |
Prod Date Range: [03/2023 -
] |
Title: M20A-FKS (ENGINE CONTROL): ECM: INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback [03/2023 - ] |
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
for K120:
-
After replacing the ECM, make sure to perform vehicle identification number (vin) registration and update ECU security key.
-
After performing the vehicle identification number (vin) registration and update ECU security key procedure, make sure to perform the initialization procedure for when the cable has been disconnected and reconnected to the negative (-) battery terminal.
for K121:
-
After replacing the ECM, make sure to perform vehicle identification number (vin) registration, ECU configuration and update ECU security key.
-
After performing the vehicle identification number (vin) registration, ECU configuration procedure and update ECU security key procedure, make sure to perform the initialization procedure for when the cable has been disconnected and reconnected to the negative (-) battery terminal.
PROCEDURE
1. INSTALL NO. 1 ECM BRACKET
(a) Install the No. 1 ECM bracket to the ECM with the 2 screws.
Torque:
4.5 N·m {46 kgf·cm, 40 in·lbf}
2. INSTALL NO. 2 ECM BRACKET
(a) Install the No. 2 ECM bracket to the ECM with the 2 screws.
Torque:
4.5 N·m {46 kgf·cm, 40 in·lbf}
3. INSTALL ECM
(a) Engage the guide to install the ECM.
NOTICE:
If the ECM has been struck or dropped, replace it.
(b) Install the bolt and nut.
Torque:
Bolt :
12.5 N·m {127 kgf·cm, 9 ft·lbf}
Nut :
8.0 N·m {82 kgf·cm, 71 in·lbf}
(c) Install the grommet.
|
|
*A
|
for K120
|
*B
|
for K121
|
*1
|
Grommet
|
|
|
(d) Engage the wire harness clamp and install the engine wire with the bolt.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(e) Connect the 2 ECM connectors and lower the 2 lock levers.
NOTICE:
-
When connecting the ECM connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the ECM connectors.
-
Be sure to securely connect the ECM connectors.
(f) Engage the 2 claws to connect the engine wire to the No. 1 engine room relay block and No. 1 junction block assembly.
(g) Connect the 3 connectors to the No. 1 engine room relay block and No. 1 junction block assembly.
(h) Engage the 2 guides and claw to install the No. 1 relay block cover to the No. 1 engine room relay block and No. 1 junction block assembly.
4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY
(a) Engage the guide to install the air cleaner case sub-assembly.
(b) Install the 2 bolts.
Torque:
4.0 N·m {41 kgf·cm, 35 in·lbf}
5. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
Click here
6. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
Click here
7. INSTALL INLET NO. 1 AIR CLEANER
Click here
8. INSTALL RADIATOR SUPPORT OPENING COVER
-
for Hatchback except GR
Click here
-
for Sedan with Illumination
Click here
-
for Sedan without Illumination
Click here
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Click here
10. VEHICLE IDENTIFICATION NUMBER (VIN) REGISTRATION
Click here
11. ECU CONFIGURATION (for K121)
Click here
12. UPDATE ECU SECURITY KEY
Click here
13. PERFORM INITIALIZATION
Click here
14. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
HINT:
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click here
|