Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000002AVFD |
Model Year Start: 2023 |
Model: Corolla Hatchback |
Prod Date Range: [03/2023 -
] |
Title: M20A-FKS (BATTERY / CHARGING): GENERATOR (for VALEO Made): DISASSEMBLY; 2023 - 2025 MY Corolla Corolla Hatchback [03/2023 - ] |
DISASSEMBLY
PROCEDURE
1. REMOVE GENERATOR PULLEY CAP (w/ Generator Clutch Pulley)
(a) Remove the generator pulley cap from the generator pulley with clutch.
NOTICE:
-
Do not reuse the generator pulley cap.
-
If the generator pulley cap is removed, replace the generator pulley cap and generator pulley with clutch with new ones as the correct grease amount cannot be confirmed.
HINT:
Although grease will be observed when the generator pulley cap is removed, this does not indicate a malfunction.
|
|
2. REMOVE GENERATOR PULLEY WITH CLUTCH (w/ Generator Clutch Pulley)
(a) Secure the generator assembly in a vise between aluminum plates.
NOTICE:
Do not overtighten the vise.
(b) Set SST and an T50 "TORX" socket wrench as shown in the illustration.
SST: 09820-30010
|
|
*a
|
T50 "TORX" Socket Wrench
|
|
|
(c) While holding SST in place, rotate the T50 "TORX" socket wrench clockwise, and remove the generator pulley with clutch.
NOTICE:
Check that the generator assembly is secured in the vise tightly.
|
|
*a
|
Hold
|
*b
|
Turn
|
*c
|
T50 "TORX" Socket Wrench
|
|
|
(d) Remove SST and the T50 "TORX" socket wrench from the generator pulley with clutch.
(e) Remove the generator assembly from the vise.
|