| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000029C3U |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [11/2022 - ] |
| Title: FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM (for G16E-GTS RH Side): INSTALLATION; 2023 - 2025 MY GR Corolla [11/2022 - ] | ||
INSTALLATION
PROCEDURE
1. TEMPORARILY INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
|
(a) Temporarily install the front lower No. 1 suspension arm sub-assembly RH to the front suspension crossmember sub-assembly with the 2 bolts and nut. |
|
(b) Connect the front lower No. 1 suspension arm sub-assembly RH to the front lower ball joint assembly RH with the bolt and 2 nuts.
Torque:
89 N·m {908 kgf·cm, 66 ft·lbf}
2. INSTALL FRONT WHEEL
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ]; MAINTENANCE: TIRE AND WHEEL: INSTALLATION](/t3Portal/stylegraphics/info.gif)
3. STABILIZE SUSPENSION
Click here
4. FULLY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
|
(a) Fully tighten the bolt (A). Torque: 240 N·m {2447 kgf·cm, 177 ft·lbf} |
|
(b) Fully tighten the bolt (B).
Torque:
125 N·m {1275 kgf·cm, 92 ft·lbf}
NOTICE:
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.
5. INSTALL REAR ENGINE UNDER COVER RH
(a) w/o Engine Under Cover Air Guide:
(1) Install the rear engine under cover RH to the vehicle with the screw and 5 clips.
(b) w/ Engine Under Cover Air Guide:
(1) Install the rear engine under cover RH to the vehicle with the 3 screw and 5 clips.
6. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
7. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
Click here
|
|