Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000029BRQ |
Model Year Start: 2023 |
Model: Corolla Hatchback |
Prod Date Range: [11/2022 - 03/2023] |
Title: M20A-FKS (ENGINE CONTROL): SFI SYSTEM: U115C87; Lost Communication with ECM/PCM "A" (ch5) Missing Message; 2023 MY Corolla Corolla Hatchback [11/2022 - 03/2023] |
DTC
|
U115C87
|
Lost Communication with ECM/PCM "A" (ch5) Missing Message
|
DESCRIPTION
The ECM and skid control ECU (brake actuator assembly) send and receive signals via CAN communication.
If a communication error occurs between the ECM and skid control ECU (brake actuator assembly), the ECM stores this DTC.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
MIL
|
Memory
|
Note
|
U115C87
|
Lost Communication with ECM/PCM "A" (ch5) Missing Message
|
There is no communication between the ECM and skid control ECU (brake actuator assembly) (1 trip detection logic).
|
-
CAN communication system
-
Skid control ECU (brake actuator assembly)
-
ECM
|
Does not come on
|
DTC stored
|
-
SAE Code: U115C
-
DTC for Mexico Models: Applies
|
CONFIRMATION DRIVING PATTERN
-
Connect the GTS to the DLC3.
-
Turn the ignition switch to ON.
-
Turn the GTS on.
-
Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
-
Turn the ignition switch off and wait for at least 30 seconds.
-
Turn the ignition switch to ON.
-
Turn the GTS on.
-
Wait 2 seconds or more.
-
Enter the following menus: Powertrain / Engine / Trouble Codes.
-
Read the pending DTCs.
HINT:
-
If a pending DTC is output, the system is malfunctioning.
-
If a pending DTC is not output, perform the following procedure.
-
Enter the following menus: Powertrain / Engine / Utility / All Readiness.
-
Input the DTC: U115C87.
-
Check the DTC judgment result.
GTS Display
|
Description
|
NORMAL
|
-
DTC judgment completed
-
System normal
|
ABNORMAL
|
-
DTC judgment completed
-
System abnormal
|
INCOMPLETE
|
-
DTC judgment not completed
-
Perform driving pattern after confirming DTC enabling conditions
|
HINT:
-
If the judgment result shows NORMAL, the system is normal.
-
If the judgment result shows ABNORMAL, the system is malfunctioning.
CAUTION / NOTICE / HINT
HINT:
Read Freeze Frame Data using the GTS. The ECM records vehicle and driving condition information as Freeze Frame Data the moment a DTC is stored. When troubleshooting, Freeze Frame Data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.
PROCEDURE
1.
|
GO TO CAN COMMUNICATION SYSTEM
|
(a) Refer to the CAN Communication System.
Click here
NEXT |
|
END
|
|