Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM10000000294YZ |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 -
] |
Title: THEFT DETERRENT / KEYLESS ENTRY: IMMOBILISER SYSTEM (w/o Smart Key System): B2795; Unmatched Key Code; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] |
DTC
|
B2795
|
Unmatched Key Code
|
DESCRIPTION
This DTC is stored when a door control transmitter assembly with a different vehicle serial number is inserted into the ignition key cylinder.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
Note
|
B2795
|
Unmatched Key Code
|
A door control transmitter assembly with a different vehicle serial number is inserted into the ignition key cylinder (1 trip detection logic*).
|
-
Door control transmitter assembly
-
Transponder key ECU assembly
|
DTC Output Confirmation Operation:
-
Insert the door control transmitter assembly into the ignition key cylinder.
|
-
*: Only output while a malfunction is present.
Vehicle Condition and Fail-safe Operation when Malfunction Detected
Vehicle Condition when Malfunction Detected
|
Fail-safe Operation when Malfunction Detected
|
-
Hybrid control system cannot be started*1
-
Engine cannot be started*2
|
-
|
-
*1: for HV Model
-
*2: for Gasoline Model
Related Data List and Active Test Items
DTC No.
|
Data List and Active Test
|
B2795
|
-
|
CAUTION / NOTICE / HINT
NOTICE:
-
If the transponder key ECU assembly or a door control transmitter assembly is replaced, refer to Registration.
Click here
-
After repair, confirm that no DTCs are output by performing "DTC Output Confirmation Operation".
PROCEDURE
(a) Clear the DTCs.
Body Electrical > Immobiliser > Clear DTCs
NEXT
|
|
|
(a) Perform "DTC Output Confirmation Operation" procedure.
(b) Check for DTCs.
Body Electrical > Immobiliser > Trouble Codes
HINT:
If DTC B2795 is stored, check for DTCs with the next door control transmitter assembly after clearing the DTCs.
OK:
DTC B2795 is not output.
Result
|
Proceed to
|
B2795 is not output
|
A
|
DTC B2795 is output for all of the door control transmitter assemblies
|
B
|
DTC B2795 is output for any of the door control transmitter assemblies
|
C
|
C
|
|
|
3.
|
CHECK OPERATION (IG ON)
|
(a) Check that the ignition switch can be turned to ON using the door control transmitter assembly for which the DTC was stored.
OK:
Ignition switch can be turned to ON using the door control transmitter assembly (for which the DTC was stored).
NG |
|
REPLACE DOOR CONTROL TRANSMITTER ASSEMBLY THAT DTC IS OUTPUT
|
OK
|
|
|
(a) Clear the DTCs.
Body Electrical > Immobiliser > Clear DTCs
(b) Reregister the key ID code with the transponder key ECU assembly.
Click here
OK:
Registration procedure can be completed.
OK |
|
END (DOOR CONTROL TRANSMITTER ASSEMBLY REGISTRATION FAILURE)
|
NG |
|
REPLACE DOOR CONTROL TRANSMITTER ASSEMBLY
|
|