| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000029441 |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [11/2022 - ] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL NO. 2 INSTRUMENT PANEL WIRE
|
(a) Connect the 2 airbag connectors and vent hole connector of the No. 2 instrument panel wire to the instrument panel passenger airbag assembly. NOTICE:
HINT: Refer to How to Connect or Disconnect Airbag Connector. Click here
|
|
(b) Engage the clamp.
2. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
|
(a) Engage the 3 hooks. |
|
|
(b) Push in the instrument panel passenger airbag assembly to engage the 3 hooks. |
|
|
(c) Install the instrument panel passenger airbag assembly with the 2 screws. |
|
3. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
4. CONNECT NO. 2 INSTRUMENT PANEL WIRE
(a) Check that the ignition switch (for Gasoline Model) or power switch (for HV Model) is off.
(b) Check that the cable is disconnected from the negative (-) auxiliary battery terminal.
CAUTION:
Wait at least 60 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.
|
(c) Connect the No. 2 instrument panel wire. NOTICE: When connecting any airbag connector, take care not to damage the airbag wire harness. HINT: Refer to How to Connect or Disconnect Airbag Connector. Click here
|
|
5. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY
Click here
|
|