| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000028WY9 |
| Model Year Start: 2023 | Model: Corolla Hatchback | Prod Date Range: [11/2022 - ] |
| Title: FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM (for M20A-FKS LH Side): INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback [11/2022 - ] | ||
INSTALLATION
PROCEDURE
1. TEMPORARILY INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH
|
(a) Temporarily install the front lower No. 1 suspension arm sub-assembly LH to the front suspension crossmember sub-assembly with the 2 bolts and nut. |
|
2. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ]; FRONT SUSPENSION: FRONT SUSPENSION MEMBER: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
3. INSTALL FRONT WHEEL
Click here
4. STABILIZE SUSPENSION
Click here
5. FULLY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH
(a) Using SST, fully tighten the bolt (A).
SST: 09961-01270
|
*a |
Torque Wrench Fulcrum Length |
|
Turn |
Torque:
Specified tightening torque :
240 N·m {2447 kgf·cm, 177 ft·lbf}
HINT:
-
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click here
-
When using SST (fulcrum length of 200 mm (7.87 in.)) + torque wrench (fulcrum length of 600 mm (1.97 ft.)):
180 N*m (1835 kgf*cm, 133 ft.*lbf)
(b) Fully tighten the bolt (B).
Torque:
125 N·m {1275 kgf·cm, 92 ft·lbf}
NOTICE:
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.
6. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
Click here
|
|