| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000028W6M |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [11/2022 - ] |
| Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY (for Hatchback): REMOVAL; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE REAR COMBINATION LIGHT COVER
(a) Disengage the 7 claws to remove the rear combination light cover as shown in the illustration.
|
Remove in this Direction |
2. REMOVE REAR COMBINATION LIGHT ASSEMBLY
(a) Apply protective tape around the rear combination light assembly as shown in the illustration.
|
Protective Tape |
|
(b) Remove the 2 screws. |
|
(c) Pull the rear combination light assembly toward the rear of the vehicle as shown in the illustration to disengage the pin and 3 guides and separate the rear combination light assembly.
|
*a |
Pin |
|
*b |
Guide |
|
|
Remove in this Direction |
NOTICE:
To prevent the rear combination light assembly from falling when disengaging the pin and guides, make sure to hold the rear combination light assembly.
|
(d) Disengage the 2 clamps. |
|
(e) Disconnect each connector to remove the rear combination light assembly.
3. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Hatchback): REMOVAL+](/t3Portal/stylegraphics/info.gif)
4. REMOVE REAR FLOOR MAT ASSEMBLY (w/o Deck Board)
Click here
5. REMOVE REAR DECK TRIM COVER (w/o Deck Board)
Click here
6. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)
Click here
7. REMOVE SPARE WHEEL CUSHION (for GR)
Click here
8. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)
Click here
9. REMOVE DECK FLOOR BOX RH (w/ Spare Tire)
Click here
10. REMOVE REAR NO. 1 FLOOR BOARD (w/ Spare Tire)
Click here
11. REMOVE FRONT DECK FLOOR BOX (w/ Spare Tire)
Click here
12. REMOVE REAR DECK TRIM COVER (w/ Deck Board)
Click here
13. SEPARATE DECK TRIM SIDE PANEL ASSEMBLY
(a) Using a clip remover, remove the 2 clips.
|
*1 |
Deck Trim Side Panel Assembly |
|
*2 |
Roof Side Inner Garnish |
|
*a |
Moulding Remover |
|
|
Separate in this Direction |
(b) Using a moulding remover, disengage the 3 claws as shown in the illustration.
NOTICE:
Do not forcefully pull the deck trim side panel assembly as it may become damaged.
(c) Disengage the 2 clips to separate the deck trim side panel assembly as shown in the illustration.
14. REMOVE REAR COMBINATION LIGHT CORD
(a) Disconnect the connector.
|
*A |
for LH Side |
*B |
for RH Side |
|
(b) Disengage the grommet to remove the rear combination light cord. |
|
|
|