Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000028VOT |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [11/2022 -
] |
Title: INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (for G16E-GTS): REMOVAL; 2023 - 2025 MY GR Corolla [11/2022 - ] |
REMOVAL
PROCEDURE
1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
2. REMOVE FRONT NO. 1 CONSOLE BOX INSERT
Click here
3. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Click here
4. REMOVE FRONT NO. 2 CONSOLE BOX INSERT
Click here
5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
Click here
6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
(a) Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.
|
Remove in this Direction
|
7. REMOVE UPPER FRONT CONSOLE PANEL SUB-ASSEMBLY
(a) Disengage the 6 clips and 2 guides as shown in the illustration.
|
Remove in this Direction
|
(b) Disconnect the connector.
(c) Disengage the clamp to remove the upper front console panel sub-assembly.
8. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY
(a) Disengage the 6 clips to remove the parking brake hole cover sub-assembly as shown in the illustration.
|
Remove in this Direction
|
9. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
(a) Disengage the 3 claws and 12 clips as shown in the illustration.
|
Remove in this Direction
|
(b) Disconnect each connector to remove the console cup holder box sub-assembly.
10. REMOVE CONSOLE BOX ASSEMBLY
(b) Remove the 2 bolts and 2 screws.
|
|
(c) Disengage the 3 guides as shown in the illustration to remove the console box assembly.
|
Remove in this Direction
|
11. REMOVE CONSOLE BOX HOLE COVER
HINT:
Perform this procedure only when replacement of the console box hole cover.
Click here
12. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY
HINT:
Perform this procedure only when replacement of the instrument panel cup holder assembly.
(a) Remove the 4WD control switch (No. 2 combination switch assembly).
Click here
(b) Remove the 4 screws and instrument panel cup holder assembly.
|
|
|