| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000028TFE |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [11/2022 - ] |
| Title: G16E-GTS (ENGINE MECHANICAL): FRONT CRANKSHAFT OIL SEAL: REMOVAL; 2023 - 2025 MY GR Corolla [11/2022 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE FRONT WHEEL RH
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
3. REMOVE REAR ENGINE UNDER COVER RH
Click here
4. REMOVE FRONT BUMPER ASSEMBLY (w/ Engine Under Cover Air Guide)
Click here
5. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH (w/ Engine Under Cover Air Guide)
Click here
6. DRAIN WASHER FLUID (w/ Engine Under Cover Air Guide)
Click here
7. REMOVE INLET HOSE (w/ Engine Under Cover Air Guide)
Click here
8. REMOVE WINDSHIELD WASHER JAR ASSEMBLY (w/ Engine Under Cover Air Guide)
Click here
9. REMOVE NO. 2 ENGINE UNDER COVER AIR GUIDE (w/ Engine Under Cover Air Guide)
Click here
10. REMOVE FAN AND GENERATOR V BELT
Click here
11. REMOVE CRANKSHAFT PULLEY ASSEMBLY
Click here
12. REMOVE TIMING CHAIN COVER OIL SEAL
|
(a) Using a screwdriver, pry out the timing chain cover oil seal. NOTICE: Do not damage the surface of the timing chain cover oil seal press fit hole or the crankshaft. HINT: Tape the screwdriver tip before use. |
|
|
|