| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000028TA6 |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [11/2022 - ] |
| Title: EXTERIOR PANELS / TRIM: FRONT DOOR BELT MOULDING: INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. PRECAUTION
NOTICE:
After turning the ignition switch (for Gasoline Model) or power switch (for HV Model) off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
2. INSTALL FRONT DOOR BELT MOULDING
|
*a |
Protrusion |
*b |
Front Door Belt Moulding Claw Part |
|
*c |
Front Door Belt Moulding Claw Part Engagement Position |
- |
- |
(a) Engage the 8 claws in the order shown in the illustration to install a new front door belt moulding LH.
HINT:
When engaging the end portion of the front door belt moulding, engage the claw in such a way that the claw does not catch on the protrusion.
3. INSTALL FRONT DOOR FIX WINDOW WEATHERSTRIP WITH FRONT DOOR FIX WINDOW GLASS
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ]; DOOR / HATCH: FRONT DOOR: REASSEMBLY+](/t3Portal/stylegraphics/info.gif)
4. INSTALL FRONT DOOR FRONT LOWER FRAME SUB-ASSEMBLY
Click here
5. CONNECT FRONT DOOR WEATHERSTRIP
(a) Connect the front door weatherstrip.
6. INSTALL FRONT DOOR GLASS RUN
Click here
7. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY
Click here
8. INSTALL FRONT DOOR SERVICE HOLE COVER
Click here
9. INSTALL NO. 3 FRONT DOOR SERVICE HOLE COVER
Click here
10. INSTALL FRONT DOOR VENT SEAL
Click here
11. INSTALL DOOR UPPER FRAME GARNISH
Click here
12. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
Click here
13. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)
Click here
14. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)
Click here
15. INSTALL FRONT DOOR ASSIST GRIP ASSEMBLY
Click here
16. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG
Click here
17. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
for G16E-GTS: Click here
for M20A-FKS: Click here
for 2ZR-FXE: Click here
18. INSTALL SPARE WHEEL CUSHION (for G16E-GTS)
Click here
19. INSTALL DECK BOARD ASSEMBLY (for G16E-GTS)
Click here
20. INITIALIZE POWER WINDOW CONTROL SYSTEM
Click here
21. INSPECT POWER WINDOW OPERATION
Click here
|
|