NOTICE:

• When any of the door window regulator sub-assemblies, power window regulator motor assemblies, door glass, door glass runs or door glass weatherstrip inner have been removed and reinstalled, the power window control system must be initialized. Functions such as the auto up and down function, jam protection function, catch protection function, remote control function, key-linked function, wireless transmitter-linked function, key-off operation function and window open warning function will not operate if initialization is not performed.
• When performing initialization, do not perform any other procedures.
• Make sure to park the vehicle and turn off all electrical systems before performing initialization. Initialization will be canceled if the vehicle is driven during initialization.
• When performing initialization, use the power window switch of each door to initialize each power window.
• Make sure not to hit, strike or vibrate the door glass during initialization because the vehicle is learning the sliding resistance of the door glass.
• Make sure not to turn the ignition switch off during initialization.