Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000028LSR
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [11/2022 -           ]
Title: SLIDING ROOF / CONVERTIBLE: SLIDING ROOF SYSTEM: DATA LIST / ACTIVE TEST; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 -        ]

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

FR Door Courtesy Switch Status

Front door courtesy light switch assembly (for RH) signal

Close or Open

Close: Front door RH closed

Open: Front door RH open

-

FL Door Courtesy Switch Status

Front door courtesy light switch assembly (for LH) signal

Close or Open

Close: Front door LH closed

Open: Front door LH open

-

IGR Power

Ignition switch status

OFF or ON

OFF: Ignition switch off

ON: Ignition switch ON

"OFF" is displayed even though the ignition switch is ACC.

Roof OPEN Switch

OPEN switch signal

OFF or ON

OFF: OPEN switch not pressed

ON: OPEN switch pressed

-

Roof CLOSE Switch

CLOSE switch signal

OFF or ON

OFF: CLOSE switch not pressed

ON: CLOSE switch pressed

-

Roof UP Switch

UP switch signal

OFF or ON

OFF: UP switch not pressed

ON: UP switch pressed

-

Roof DOWN Switch

DOWN switch signal

OFF or ON

OFF: DOWN switch not pressed

ON: DOWN switch pressed

-

Roof Initialize Status

Sliding roof initialize status

Initialized or Uninitialized

Display initialization status

-

Communication Slide Roof

Connection status between sliding roof ECU (sliding roof drive gear sub-assembly) and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Communication stopped

OK: Normal communication

-

Door Key P/W Up Function

Key-linked power windows and sliding roof close function

Disable or Enable

Customize setting displayed

-

Door Key P/W Down Function

Key-linked power windows and sliding roof open function

Disable or Enable

Customize setting displayed

-

P/W Up W/ Transmit Function

Wireless transmitter-linked power windows and sliding roof close function

Disable or Enable

Customize setting displayed

w/ Wireless Transmitter-linked Power Windows and Sliding Roof Close Function

P/W Down W/ Transmit Function

Wireless transmitter-linked power windows and sliding roof open function

Disable or Enable

Customize setting displayed

-

Slide Roof Open Warning Function

Sliding roof open warning function

Disable or Enable

Customize setting displayed

-

Roof Switch Auto Operation Setting

Sliding roof auto operation function

Disable or Enable

Customize setting displayed

-

ACTIVE TEST

HINT:

Using the GTS, perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Perform the Active Test according to the display on the GTS.

Body Electrical > Main Body > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Sliding Roof Open

Sliding roof open activate

OFF/ON

-

Sliding Roof Close

Sliding roof close activate

OFF/ON

-