OPERATION CHECK

NOTICE:

Make sure that the vehicle is in an area that allows the wireless control function to operate.

CHECK CUSTOMIZE PARAMETERS

(a) The operation check below is based on the non-customized initial condition of the vehicle.

Click here

CHECK BASIC FUNCTIONS

(a) Check that all of the doors lock when the lock switch is pressed.

(b) Check that all of the doors unlock when the unlock switch is pressed.

(c) Check that the luggage compartment door opens when the luggage compartment door open switch is held down for 0.8 seconds or more.*

CHECK THE CHATTERING PREVENTION FUNCTION

(a) Press and hold the lock or unlock switch on the door control transmitter assembly and check that the corresponding operation occurs only once and is not repeated continuously while the switch is held. Then press the switch repeatedly at 1-second intervals, check that the corresponding operation is carried out.

CHECK THE SWITCH OPERATION FAIL-SAFE FUNCTION

(a) Check that the doors cannot be locked/unlocked when operating a switch on an unregistered door control transmitter assembly, but the doors can be locked/unlocked by operating a switch on a registered door control transmitter assembly.

(b) Check that the doors cannot be locked/unlocked when a switch is operated with the key inserted into the ignition key cylinder. This does not apply when registering the identification code.

CHECK THE AUTOMATIC LOCKING FUNCTION

(a) Check that the doors lock automatically if none of the doors have been opened or all of the doors have not been locked within approximately 60 seconds of all of the doors being unlocked by pressing the unlock switch.

(b) Check that the automatic locking function does not operate when any door has been opened within approximately 60 seconds of unlocking the doors by pressing the unlock switch.

(c) Check that the automatic locking function does not operate when all of the doors have been locked manually (such as using key linked operation, or by pressing the lock switch) within approximately 60 seconds of unlocking the doors by pressing the unlock switch.

CHECK ANSWER-BACK (WIRELESS DOOR LOCK BUZZER) FUNCTION

(a) When the lock switch is pressed, check that the buzzer sounds once simultaneously with the locking operation of all doors.

(b) When the lock switch is pressed with any door open and then the doors are closed, check that the buzzer sounds once.

(c) When the unlock switch is pressed once, check that the buzzer sounds twice simultaneously with the unlocking operation of all doors.*1

(d) When the unlock switch is pressed once, check that the buzzer sounds twice simultaneously with the unlocking operation of the driver door.*2

(e) When the back door is opened by wireless operation, the wireless door lock buzzer sounds.

CHECK THE ANSWER-BACK (HAZARD WARNING LIGHT) FUNCTION

(a) When the lock switch is pressed, check that the hazard warning lights flash once simultaneously with the locking operation of all of the doors.

(b) When the lock switch is pressed with any door open and then the doors are closed, check that the hazard warning lights flash once.

(c) When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of all doors.*1

(d) When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of the driver door.*2

HINT:

When the wireless lock with doors open function is set to "Enable", this function is canceled even if set to "Enable".

CHECK DOOR AJAR WARNING FUNCTION

(a) Check that the wireless door lock buzzer sounds for approximately 5 seconds when the lock switch is pressed with any of the doors ajar or open.

CHECK PANIC ALARM CONTROL FUNCTION

Click here

CHECK THE ILLUMINATED ENTRY FUNCTION

Click here

CHECK THE POWER WINDOW OPERATION FUNCTION

Click here

CHECK THE SLIDING ROOF OPERATION FUNCTION (w/ Sliding Roof System)

Click here