Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000028JD6
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [11/2022 -           ]
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE ACTUATOR (for Gasoline Model): INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]

INSTALLATION

CAUTION / NOTICE / HINT

w/ Electric Parking Brake System:

HINT:

The parking brake indicator light blinks (red) when the ignition switch is turned to ON after replacing the brake actuator assembly. Operate the electric parking brake switch assembly to turn off the parking brake indicator light.

PROCEDURE

1. INSTALL BRAKE ACTUATOR BRACKET CUSHION (except G16E-GTS)

(a) Install the 3 brake actuator bracket cushions to the brake actuator bracket assembly.

(b) Install the 3 No. 1 brake actuator case collars to the brake actuator bracket cushion.

NOTICE:

Make sure that the No. 1 brake actuator case collar is in full contact with the brake actuator bracket cushion.

(c) Install the brake actuator bracket assembly with the 3 nuts.

Torque:

19 N·m {194 kgf·cm, 14 ft·lbf}

2. INSTALL BRAKE ACTUATOR ASSEMBLY (except G16E-GTS)

(a) Temporarily install the brake actuator assembly with the 3 bolts.

(b) Fully tighten the 3 bolts in the order shown in the illustration.

Torque:

6.5 N·m {66 kgf·cm, 58 in·lbf}

NOTICE:

  • Do not remove the hole plugs of a new brake actuator assembly before connecting the brake tubes because the brake actuator assembly is filled with brake fluid.
  • Do not hold the brake actuator assembly by the connector.
  • Do not drop the brake actuator assembly when carrying it.

3. INSTALL BRAKE ACTUATOR ASSEMBLY (for G16E-GTS)

(a) Temporarily install the brake actuator assembly with the 3 bolts.

(b) Fully tighten the 3 bolts in the order shown in the illustration.

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

NOTICE:

  • Do not remove the hole plugs of a new brake actuator assembly before connecting the brake tubes because the brake actuator assembly is filled with brake fluid.
  • Do not hold the brake actuator assembly by the connector.
  • Do not drop the brake actuator assembly when carrying it.

4. INSTALL BRAKE ACTUATOR BRACKET CUSHION (for G16E-GTS)

(a) Install the 3 brake actuator bracket cushions to the brake actuator bracket assembly.

(b) Install the 3 No. 1 brake actuator case collars to the brake actuator bracket cushion.

NOTICE:

Make sure that the No. 1 brake actuator case collar is in full contact with the brake actuator bracket cushion.

(c) Install the brake actuator bracket assembly with the 3 nuts.

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

5. INSTALL BRAKE ACTUATOR WITH BRACKET

(a) Temporarily install the brake actuator with bracket to the vehicle body with the bolt and 2 nuts.

NOTICE:

  • Do not kink or damage the brake lines.
  • Do not allow any foreign matter such as dirt or dust to enter the brake lines from the connecting parts.
  • Be careful not to allow any brake fluid to enter the connector.
  • Do not hold the brake actuator assembly by the connector.
  • Do not drop the brake actuator with bracket when carrying it.

HINT:

Install the brake actuator with bracket while avoiding the brake lines.

(b) Fully tighten the bolt and 2 nuts in the order shown in the illustration.

Torque:

19 N·m {194 kgf·cm, 14 ft·lbf}

(c) Engage the 5 clamps to install a new No. 1 brake tube clamp to the brake lines.

NOTICE:

Do not kink or damage the brake lines.

(d) Temporarily tighten each brake line to the correct position on the brake actuator assembly as shown in the illustration.

NOTICE:

  • Do not kink or damage the brake line.
  • Do not allow any foreign matter such as dirt or dust to enter the brake line from the connecting parts.

*a

From 1st Chamber of Brake Master Cylinder Sub-assembly

*b

From 2nd Chamber of Brake Master Cylinder Sub-assembly

*c

To Front Wheel Cylinder Assembly RH

*d

To Rear Wheel Cylinder Assembly LH

*e

To Rear Wheel Cylinder Assembly RH

*f

To Front Wheel Cylinder Assembly LH

(e) Using a union nut wrench, connect the 6 brake lines to the brake actuator assembly.

Torque:

Specified tightening torque (A) :

15.2 N·m {155 kgf·cm, 11 ft·lbf}

Specified tightening torque (B) :

19.5 N·m {199 kgf·cm, 14 ft·lbf}

NOTICE:

  • Do not kink or damage the brake lines.
  • Do not allow the brake lines to twist or interfere with other parts or the vehicle body during tightening.
  • Do not allow any foreign matter such as dirt or dust to enter the brake lines from the connecting parts.

HINT:

  • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

    Click here 2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 -        ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION

  • When using a union nut wrench (fulcrum length of 22 mm (0.866 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)):

    (A): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)

  • When using a union nut wrench (fulcrum length of 20 mm (0.787 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)):

    (B): 17.4 N*m (177 kgf*cm, 13 ft.*lbf)

*a

Torque Wrench Fulcrum Length

*b

Union Nut Wrench

(f) except G16E-GTS:

(1) Connect the connector to the brake actuator assembly and lock the lock lever.

Connect the connector

Lock the lock lever

NOTICE:

  • Make sure that the connector is locked securely.
  • Make sure that the actuator connector can be connected smoothly.
  • Do not allow water, oil or dirt to enter the connector.

(g) for G16E-GTS:

(1) Connect the connector to the brake actuator assembly and lock the lock lever.

Connect the connector

Lock the lock lever

NOTICE:

  • Make sure that the connector is locked securely.
  • Make sure that the actuator connector can be connected smoothly.
  • Do not allow water, oil or dirt to enter the connector.

6. INSTALL DASH PANEL HEAT INSULATOR (for M20A-FKS)

(a) Temporarily install the dash panel heat insulator to the vehicle body with the 2 nuts (A).

(b) Install the nut (B).

Torque:

5.0 N·m {51 kgf·cm, 44 in·lbf}

(c) Tighten the 2 nuts (A).

Torque:

5.0 N·m {51 kgf·cm, 44 in·lbf}

7. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY (for M20A-FKS)

Click here 2023 MY Corolla Corolla Hatchback [11/2022 - 03/2023]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2023 - 2025 MY Corolla Corolla Hatchback [03/2023 -        ]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

8. INSTALL DASH PANEL HEAT INSULATOR (for G16E-GTS)

(a) Temporarily install the dash panel heat insulator to the vehicle body with the 2 nuts (A).

(b) Install the nut (B).

Torque:

5.0 N·m {51 kgf·cm, 44 in·lbf}

(c) Tighten the 2 nuts (A).

Torque:

5.0 N·m {51 kgf·cm, 44 in·lbf}

9. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY (for G16E-GTS)

Click here 2023 - 2025 MY GR Corolla [11/2022 -        ]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

10. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY

except G16E-GTS: Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV [09/2022 -        ]; FRONT SUSPENSION: FRONT SHOCK ABSORBER (except G16E-GTS): INSTALLATION+

for G16E-GTS: Click here 2023 - 2025 MY GR Corolla [11/2022 -        ]; FRONT SUSPENSION: FRONT SHOCK ABSORBER (for G16E-GTS): INSTALLATION+

11. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL

except G16E-GTS: Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV [09/2022 -        ]; FRONT SUSPENSION: FRONT SHOCK ABSORBER (except G16E-GTS): INSTALLATION+

for G16E-GTS: Click here 2023 - 2025 MY GR Corolla [11/2022 -        ]; FRONT SUSPENSION: FRONT SHOCK ABSORBER (for G16E-GTS): INSTALLATION+

12. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 -        ]; WIPER / WASHER: FRONT WIPER MOTOR: INSTALLATION

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

for M20A-FKS: Click here 2023 - 2025 MY Corolla Corolla Hatchback [09/2022 -        ]; MAINTENANCE: M20A-FKS BATTERY: INSTALLATION

for G16E-GTS: Click here 2023 - 2025 MY GR Corolla [09/2022 -        ]; MAINTENANCE: G16E-GTS BATTERY: INSTALLATION

14. UPDATE ECU SECURITY KEY

HINT:

Perform this procedure only when replacement of the brake actuator assembly is necessary.

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; SETUP: WHEN REPLACING OR REMOVING/INSTALLING PARTS: UPDATE ECU SECURITY KEY

15. BLEED BRAKE SYSTEM

Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]; BRAKE SYSTEM (OTHER): BRAKE FLUID (for Gasoline Model): BLEEDING

16. ACCELERATION SENSOR ZERO POINT CALIBRATION AND STORE SYSTEM INFORMATION MEMORIZATION

for Gasoline Model with Electric Parking Brake System: Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model with Electric Parking Brake System): UTILITY

for Gasoline Model without Electric Parking Brake System TMC Made: Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model without Electric Parking Brake System TMC Made): UTILITY

17. PERFORM TEST MODE INSPECTION

for Gasoline Model with Electric Parking Brake System: Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model with Electric Parking Brake System): TEST MODE PROCEDURE

for Gasoline Model without Electric Parking Brake System TMC Made: Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model without Electric Parking Brake System TMC Made): TEST MODE PROCEDURE

18. INSPECT BRAKE ACTUATOR USING TECHSTREAM

Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE ACTUATOR (for Gasoline Model): ON-VEHICLE INSPECTION

19. CHECK FOR AND CLEAR DTCS

for Gasoline Model with Electric Parking Brake System: Click here 2023 MY Corolla Corolla Hatchback GR Corolla [11/2022 - 08/2023]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model with Electric Parking Brake System): DTC CHECK / CLEAR 2024 - 2025 MY Corolla Corolla Hatchback GR Corolla [08/2023 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model with Electric Parking Brake System): DTC CHECK / CLEAR

for Gasoline Model without Electric Parking Brake System TMC Made: Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model without Electric Parking Brake System TMC Made): DTC CHECK / CLEAR