| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000028JC1 |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [11/2022 - ] |
| Title: NETWORKING: NETWORK GATEWAY ECU: INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
PROCEDURE
1. INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for TMMMS Made)
(a) Engage the 2 claws to install the central gateway ECU (network gateway ECU) as shown in the illustration.
|
Install in this Direction |
NOTICE:
Make sure that the central gateway ECU (network gateway ECU) is securely installed.
2. INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for TMC Made)
(a) Engage the 2 claws to install the central gateway ECU (network gateway ECU) as shown in the illustration.
|
|
Install in this Direction |
NOTICE:
Make sure that the central gateway ECU (network gateway ECU) is securely installed.
3. INSTALL ECU INTEGRATION BOX RH
(a) for TMMMS Made:
(1) Install the ECU integration box RH with the bolt and nut.
(b) for TMC Made:
(1) Install the ECU integration box RH with the bolt and 2 nuts.
(c) Engage the 2 clamps.
(d) Connect each connector.
4. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
Click here
6. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
Click here
7. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
Click here
8. INSTALL AIR CONDITIONING CONTROL ASSEMBLY
Click here
9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here
10. INSTALL NO. 2 INSTRUMENT SIDE PANEL
Click here
11. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Click here
12. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
Click here
13. INSTALL FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedure as for the LH side.
Click here
14. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Click here
15. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
|
|