Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM1000000028J87 |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [11/2022 -
] |
Title: CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during DCM (telematics transceiver) removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function When Necessary Procedures are not Performed
|
Link
|
DCM (telematics transceiver)
|
DCM activation
|
Safety Connect System
|
|
Code registration (Smart key System (for Start Function))
|
Telematics System
|
|
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function When Necessary Procedures are not Performed
|
Link
|
DCM (telematics transceiver)
|
DCM activation
|
Safety Connect System
|
|
w/ Smart Key System
-
Code registration (Smart key System (for Start Function))
|
Telematics System
|
|
w/o Smart Key System
-
Code registration (Immobiliser system)
|
Telematics System
|
|
PROCEDURE
1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
2. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Click here
3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
Click here
4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here
5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
Click here
6. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
Click here
7. DISCONNECT INSTRUMENT PANEL WIRE
(b) Remove the 2 nuts and disconnect the instrument panel wire as shown in the illustration.
|
|
8. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET
(a) Disconnect the 6 connectors.
|
|
(b) Remove the 2 nuts and DCM (telematics transceiver) with bracket.
9. REMOVE NO. 2 TELEPHONE BRACKET
(a) Remove the 2 screws and No. 2 telephone bracket.
|
|
10. REMOVE NO. 1 TELEPHONE BRACKET
(a) Remove the 2 screws and No. 1 telephone bracket.
|
|
11. REMOVE DCM (TELEMATICS TRANSCEIVER)
|