Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000028IPY
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [11/2022 -           ]
Title: POWER DISTRIBUTION: INTEGRATION RELAY: INSPECTION; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 -        ]

INSPECTION

PROCEDURE

1. INSPECT NO. 1 INTEGRATION RELAY

(a) IG1 NO. 3 RELAY:

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

9A-4 - 9A-3

Auxiliary battery voltage not applied between terminals 9A-1 and 9A-2

10 kΩ or higher

9A-4 - 9A-3

Auxiliary battery positive (+) → 9A-2

Auxiliary battery negative (-) → 9A-1

Below 1 Ω

If the result is not as specified, replace the No. 1 integration relay.

*a

Component without harness connected

(No. 1 Integration Relay)

(b) H-LP LH RELAY:

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

9A-5 - 9B-1

Auxiliary battery voltage not applied between terminals 9A-5 and 9B-2

10 kΩ or higher

9A-5 - 9B-1

Auxiliary battery positive (+) → 9A-5

Auxiliary battery negative (-) → 9B-2

Below 1 Ω

If the result is not as specified, replace the No. 1 integration relay.

*a

Component without harness connected

(No. 1 Integration Relay)

(c) EFI-MAIN RELAY:

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

9B-3 - 9B-4

Auxiliary battery voltage not applied between terminals 9B-6 and 9B-5

10 kΩ or higher

9B-3 - 9B-4

Auxiliary battery positive (+) → 9B-5

Auxiliary battery negative (-) → 9B-6

Below 1 Ω

If the result is not as specified, replace the No. 1 integration relay.

*a

Component without harness connected

(No. 1 Integration Relay)

(d) IG2 NO. 1 RELAY:

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

9A-10 - 9A-9

Auxiliary battery voltage not applied between terminals 9A-7 and 9A-8

10 kΩ or higher

9A-10 - 9A-9

Auxiliary battery positive (+) → 9A-7

Auxiliary battery negative (-) → 9A-8

Below 1 Ω

If the result is not as specified, replace the No. 1 integration relay.

*a

Component without harness connected

(No. 1 Integration Relay)

(e) H-LP RH RELAY:

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

9B-8 - 9A-12

Auxiliary battery voltage not applied between terminals 9B-8 and 9A-11

10 kΩ or higher

9B-8 - 9A-12

Auxiliary battery positive (+) → 9B-8

Auxiliary battery negative (-) → 9A-11

Below 1 Ω

If the result is not as specified, replace the No. 1 integration relay.

*a

Component without harness connected

(No. 1 Integration Relay)

(f) P-CON RELAY:

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

9B-9 - 9B-10

Auxiliary battery voltage not applied between terminals 9B-11 and 9B-12

10 kΩ or higher

9B-9 - 9B-10

Auxiliary battery positive (+) → 9B-11

Auxiliary battery negative (-) → 9B-12

Below 1 Ω

If the result is not as specified, replace the No. 1 integration relay.

*a

Component without harness connected

(No. 1 Integration Relay)