Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000028HGY
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [11/2022 -           ]
Title: EXTERIOR PANELS / TRIM: FRONT BUMPER (for Sedan with Illumination): INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 -        ]

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

When the front bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it is necessary to perform millimeter wave radar sensor adjustment.

for Target Adjustment (Triangle Target):

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 -        ]; ADVANCED DRIVER ASSISTANCE SYSTEM: MILLIMETER WAVE RADAR SENSOR: TARGET ADJUSTMENT(TRIANGLE TARGET)

for Target Adjustment (Flat Surface Target):

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 -        ]; ADVANCED DRIVER ASSISTANCE SYSTEM: MILLIMETER WAVE RADAR SENSOR: TARGET ADJUSTMENT(FLAT SURFACE TARGET)

for Driving Adjustment:

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 -        ]; ADVANCED DRIVER ASSISTANCE SYSTEM: MILLIMETER WAVE RADAR SENSOR: DRIVING ADJUSTMENT

PROCEDURE

1. INSTALL FRONT BUMPER ASSEMBLY

(a) Move the front bumper assembly into position and engage the 5 claws as shown in the illustration.

Install in this Direction

(b) Install the bolt and 2 screws.

(c) Pull back the side of the front bumper assembly and connect the connector.

NOTICE:

Do not apply excessive force when pulling back the front bumper assembly.

HINT:

Use the same procedure for the RH side and LH side.

(d) w/ Pre-collision System:

(1) Connect the connector.

(e) Engage the 4 claws as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.

Install in this Direction

(f) Install the 10 screws.

(g) Engage the 2 claws as shown in the illustration.

Install in this Direction

HINT:

Use the same procedure for the RH side and LH side.

(h) Install the front bumper assembly with the 2 clips.

2. INSTALL RADIATOR SUPPORT OPENING COVER (for Gasoline Model)

(a) Install the radiator support opening cover with the 7 clips.

3. INSTALL RADIATOR SUPPORT OPENING COVER (for HV Model)

(a) Install the radiator support opening cover with the 6 clips.