- Door control receiver*1
| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000028GQR |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - 11/2022] |
| Title: DOOR LOCK: DOOR CONTROL RECEIVER (for Sedan without Tire Pressure Warning System): REMOVAL; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during door control receiver removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedures are not Performed |
Link |
|---|---|---|---|
| *1: w/o Smart Key System | |||
|
|
Code registration |
Wireless door lock control system |
|
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedures are not Performed |
Link |
|---|---|---|---|
| *1: w/o Smart Key System | |||
|
Code registration |
Wireless door lock control system |
|
PROCEDURE
1. REMOVE REAR SEAT ASSEMBLY
Click here
![2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - ]; SEAT: REAR SEAT ASSEMBLY: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE REAR DOOR SCUFF PLATE LH (for Gasoline Model)
Click here
3. REMOVE REAR DOOR SCUFF PLATE RH (for Gasoline Model)
HINT:
Use the same procedure as for the LH side.
4. REMOVE REAR DOOR SCUFF PLATE LH (for HV Model)
Click here
5. REMOVE REAR DOOR SCUFF PLATE RH (for HV Model)
HINT:
Use the same procedure as for the LH side.
6. REMOVE REAR UNDER SIDE COVER LH (for HV Model)
Click here
7. REMOVE REAR UNDER SIDE COVER RH (for HV Model)
HINT:
Use the same procedure as for the LH side.
8. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH
Click here
9. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedure as for the LH side.
10. REMOVE REAR SEAT SIDE GARNISH LH (w/o Rear Seat Side Airbag)
Click here
11. REMOVE REAR SEAT SIDE GARNISH LH (w/ Rear Seat Side Airbag)
Click here
12. REMOVE REAR SEAT SIDE GARNISH RH (w/o Rear Seat Side Airbag)
HINT:
Use the same procedure as for the LH side.
13. REMOVE REAR SEAT SIDE GARNISH RH (w/ Rear Seat Side Airbag)
HINT:
Use the same procedure as for the LH side.
14. REMOVE ROOF SIDE INNER GARNISH LH
Click here
15. REMOVE ROOF SIDE INNER GARNISH RH
HINT:
Use the same procedure as for the LH side.
16. REMOVE CENTER STOP LIGHT SET
Click here
17. REMOVE PACKAGE TRAY TRIM BRACKET LH
Click here
18. REMOVE PACKAGE TRAY TRIM BRACKET RH
HINT:
Use the same procedure as for the LH side.
19. REMOVE REAR SEAT SHOULDER BELT HOLE COVER
Click here
20. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
Click here
21. REMOVE DOOR CONTROL RECEIVER (w/o Smart Key System)
NOTICE:
- Do not drop, strike or otherwise subject the door control receiver to impact.
- If the door control receiver is subjected to an impact, replace it with a new one.
|
(a) Remove the clip. |
|
|
(b) Turn back the package tray trim pad as shown in the illustration. |
|
|
(c) Remove the bolt. |
|
(d) Disengage the guide.
(e) Disconnect the connector to remove the door control receiver.
22. REMOVE SMART DOOR CONTROL RECEIVER ASSEMBLY (w/ Smart Key System)
NOTICE:
- Do not drop, strike or otherwise subject the smart door control receiver assembly to impact.
- If the smart door control receiver assembly is subjected to an impact, replace it with a new one.
|
(a) Remove the clip. |
|
|
(b) Turn back the package tray trim pad as shown in the illustration. |
|
|
(c) Remove the bolt. |
|
(d) Disengage the guide.
(e) Disconnect the connector to remove the smart door control receiver assembly.
|
|