Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000028G5T |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [11/2022 -
] |
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT SEAT SIDE AIRBAG ASSEMBLY: REMOVAL; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during front seat airbag assembly removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Removal/installation of the front passenger seat
|
Zero point calibration (Occupant classification system)
|
-
Occupant Classification System
-
Passenger airbag ON/OFF indicator
-
Airbag System (Front passenger side)
-
Seat Belt Warning System (Front passenger)
|
|
Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Removal/installation of the front passenger seat
|
Zero point calibration (Occupant classification system)
|
-
Occupant Classification System
-
Passenger airbag ON/OFF indicator
-
Airbag System (Front passenger side)
|
for TMC Made
for TMMMS Made
|
HINT:
When the cable is disconnected / reconnected to the battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
Items for which learning is completed by driving the vehicle (for HV Model)
Effect/Inoperative Function when Necessary Procedure not Performed
|
Necessary Procedures
|
Link
|
Front Camera System
|
Drive the vehicle straight ahead at 15 km/h (9 mph) or more for 1 second or more.
|
|
Items for which learning is completed by driving the vehicle (for Gasoline Model)
Effect/Inoperative Function when Necessary Procedure not Performed
|
Necessary Procedures
|
Link
|
Front Camera System
|
-
Drive the vehicle straight ahead at 35 km/h (22 mph) or more for 5 seconds or more.*1
-
Drive the vehicle straight ahead at 15 km/h (9 mph) or more for 1 second or more.*2
|
|
Learning completes when vehicle is operated normally (for Gasoline Model)
Effect/Inoperative Function when Necessary Procedure not Performed
|
Necessary Procedures
|
Link
|
Power Door Lock Control System
|
Perform door unlock operation with door control switch or electrical key transmitter sub-assembly switch.
|
|
CAUTION:
-
Be sure to read Precaution thoroughly before servicing.
Click here
-
Wear protective gloves. Sharp areas on the parts may injure your hands.
for HV Model
-
After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 3 minutes before disconnecting the cable from the negative (-) auxiliary battery terminal.
-
When the cable is disconnected from the negative (-) auxiliary battery terminal and the security lock setting has been enabled, multi-display operations will be disabled upon next startup unless the password is entered. Be sure to check the security lock setting before disconnecting the cable from the negative (-) auxiliary battery terminal. (for Audio and Visual System (for Single Knob Type))
for Gasoline Model
-
After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 3 minutes before disconnecting the cable from the negative (-) auxiliary battery terminal.
-
When the cable is disconnected from the negative (-) auxiliary battery terminal and the security lock setting has been enabled, multi-display operations will be disabled upon next startup unless the password is entered. Be sure to check the security lock setting before disconnecting the cable from the negative (-) auxiliary battery terminal. (for Audio and Visual System (for Single Knob Type))
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)
Click here
2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Manual Seat)
Click here
3. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side Manual Seat)
Click here
4. REMOVE RECLINING HINGE COVER (for Manual Seat)
Click here
5. REMOVE RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat)
Click here
6. REMOVE LH SEAT SEAT ADJUSTER COVER CAP (for Driver Side Manual Seat)
Click here
7. REMOVE FRONT SEAT CUSHION SHIELD (for Manual Seat)
for Driver Side: Click here
for Front Passenger Side: Click here
8. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Manual Seat)
for Driver Side: Click here
for Front Passenger Side: Click here
9. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY (for Manual Seat)
Click here
10. REMOVE FRONT SEAT HEADREST SUPPORT (for Manual Seat with Removable Headrest)
Click here
11. REMOVE FRONT SEATBACK BEZEL LH (for Manual Seat with Non-removable Headrest)
Click here
12. REMOVE FRONT NO. 2 SEATBACK BEZEL (for Manual Seat with Non-removable Headrest)
Click here
13. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat)
Click here
14. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)
Click here
15. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Power Seat)
Click here
16. REMOVE FRONT SEAT FRONT CUSHION SHIELD (for Power Seat)
Click here
17. REMOVE FRONT SEAT CUSHION SHIELD (for Power Seat)
Click here
18. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Power Seat)
Click here
19. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY (for Power Seat)
Click here
20. REMOVE FRONT SEAT HEADREST SUPPORT (for Power Seat)
Click here
21. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat)
Click here
22. REMOVE FRONT SEAT AIRBAG ASSEMBLY
CAUTION:
When storing the front seat airbag assembly, keep the airbag deployment side facing upward.
|
Deployment Side
|
(b) Remove the 2 nuts and front seat airbag assembly.
NOTICE:
-
Do not reuse the nuts.
-
Make sure that the front seatback frame sub-assembly is not deformed. If it is deformed, replace it with a new one.
|