Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000028FMN |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [11/2022 -
] |
Title: TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER (for Sedan): REMOVAL; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during tire pressure warning ECU and receiver removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced (for HV Model)
Replacement Part or Procedure
|
Necessary Procedures
|
Effects/Inoperative when not Performed
|
Link
|
Tire pressure warning ECU and receiver
|
-
ID Registration
-
Initialization
-
Tire Position Identification
|
Tire Pressure Warning System
|
|
Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)
Replacement Part or Procedure
|
Necessary Procedures
|
Effects/Inoperative when not Performed
|
Link
|
Tire pressure warning ECU and receiver
|
-
ID Registration
-
Initialization
-
Tire Position Identification
|
Tire Pressure Warning System
|
|
NOTICE:
When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the Techstream and write them down before removal.
for HV Model: Click here
for Gasoline Model: Click here
PROCEDURE
1. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
Click here
2. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER
NOTICE:
-
Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.
-
If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.
(b) Disengage the guide.
(c) Disconnect the connector to remove the tire pressure warning ECU and receiver.
|