Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000028EHK |
Model Year Start: 2023 |
Model: Corolla Hatchback |
Prod Date Range: [11/2022 -
] |
Title: K120 / K121 (CVT): K120 CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM: P175009; Brake ECU Malfunction; 2023 - 2025 MY Corolla Corolla Hatchback [11/2022 - ] |
DTC
|
P175009
|
Brake ECU Malfunction
|
DESCRIPTION
This DTC is stored if the TCM receives a malfunction signal from the skid control ECU (brake actuator assembly).
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
MIL
|
Memory
|
Note
|
P175009
|
Brake ECU Malfunction
|
When the vehicle is being driven at 20 km/h (12 mph) or more, the TCM receives a malfunction signal from the skid control ECU (brake actuator assembly) for 9 seconds or more (1-trip detection logic).
|
Electronically controlled brake system
|
Comes on
|
DTC stored
|
SAE Code:
P1750
|
CONFIRMATION DRIVING PATTERN
HINT:
After repairs have been completed, clear the DTCs and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.
-
Connect the Techstream to the DLC3.
-
Turn the ignition switch to ON and turn the Techstream on.
-
Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
-
Turn the ignition switch off and wait for 2 minutes or more.
-
Turn the ignition switch to ON and turn the Techstream on.
-
Start the engine.
-
Drive the vehicle at 20 km/h (12 mph) or more for 9 seconds or more.
-
Stop the vehicle.
-
Enter the following menus: Powertrain / Transmission / Utility / All Readiness.
-
Input the DTC: P175009.
-
Check the DTC judgment result.
Techstream Display
|
Description
|
NORMAL
|
-
DTC judgment completed
-
System normal
|
ABNORMAL
|
-
DTC judgment completed
-
System abnormal
|
INCOMPLETE
|
-
DTC judgment not completed
-
Perform driving pattern after confirming DTC enabling conditions
|
N/A
|
-
Unable to perform DTC judgment
-
Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit
|
HINT:
-
If the judgment result shows NORMAL, the system is normal.
-
If the judgment result shows ABNORMAL, the system has a malfunction.
-
If the judgment result shows INCOMPLETE or N/A, perform the Confirmation Driving Pattern and check the DTC judgment result again.
PROCEDURE
1.
|
CHECK DTC OUTPUT (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
|
(a) Check for electronically controlled brake system DTCs.
Chassis > Brake/EPB > Trouble Codes
Result
|
Proceed to
|
DTCs are not output
|
A
|
DTCs are output
|
B
|
|