Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM1000000028DIR
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [11/2022 -           ]
Title: CLUTCH: CLUTCH PEDAL SWITCH: INSPECTION; 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]

INSPECTION

PROCEDURE

1. INSPECT CLUTCH START SWITCH ASSEMBLY

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

On (Pushed in)

Below 1 Ω

Off (Released)

10 kΩ or higher

If the result is not as specified, replace the clutch start switch assembly.

*a

Component without harness connected

(Clutch Start Switch Assembly)

*b

11.65 to 12.35 mm (0.459 to 0.486 in.)

*c

On

*d

Off