Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000028DBG |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [11/2022 -
] |
Title: LIGHTING (INT): LIGHTING SYSTEM: Interior Light Auto Cut Circuit; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ] |
Interior Light Auto Cut Circuit
|
DESCRIPTION
The main body ECU (multiplex network body ECU) controls operation of the DOME CUT relay in order to supply power to the interior lights. When the battery saving function operates while the interior lights are on, the main body ECU (multiplex network body ECU) opens the DOME CUT relay to turn off the lights.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
PROCEDURE
1.
|
PERFORM ACTIVE TEST USING TECHSTREAM
|
(a) Perform the Active Test according to the display on the Techstream.
Body Electrical > Main Body > Active Test
Tester Display
|
Measurement Item
|
Control Range
|
Diagnostic Note
|
Relay for Interior Light Auto Cut Function
|
DOME CUT relay
|
OFF or ON
|
When performing this Active Test, turn all the interior lights on.
-
OFF: DOME CUT relay on (interior lights turn on)
-
ON: DOME CUT relay off (interior lights turn off)
|
Body Electrical > Main Body > Active Test
Tester Display
|
Relay for Interior Light Auto Cut Function
|
OK:
All of the interior lights turn off when ON is selected.
NG
|
|
|
2.
|
CHECK HARNESS AND CONNECTOR (POWER SOURCE - POWER DISTRIBUTION BOX ASSEMBLY)
|
(a) Disconnect the 8K power distribution box assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Tester Connection
|
Condition
|
Specified Condition
|
8K-1 - Body ground
|
Always
|
11 to 14 V
|
NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR
|
|