Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000028DBD |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [11/2022 -
] |
Title: LIGHTING (INT): LIGHTING SYSTEM: Rear Door Courtesy Switch Circuit; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ] |
Rear Door Courtesy Switch Circuit
|
DESCRIPTION
The main body ECU (multiplex network body ECU) detects the condition of the rear door courtesy light switch assembly.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.*
for Gasoline Model: Click here
for HV Model: Click here
PROCEDURE
1.
|
READ VALUE USING TECHSTREAM
|
(a) Read the Data List according to the display on the Techstream.
Body Electrical > Main Body > Data List
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
RR Door Courtesy Switch Status
|
Rear door courtesy light switch assembly (for RH) signal
|
Close or Open
|
Close: Rear door RH closed
Open: Rear door RH open
|
-
|
RL Door Courtesy Switch Status
|
Rear door courtesy light switch assembly (for LH) signal
|
Close or Open
|
Close: Rear door LH closed
Open: Rear door LH open
|
-
|
Body Electrical > Main Body > Data List
Tester Display
|
RR Door Courtesy Switch Status
|
RL Door Courtesy Switch Status
|
OK:
Normal conditions listed above are displayed.
Result
|
Proceed to
|
OK
|
A
|
NG ("RL Door Courtesy Switch Status" is not normal)
|
B
|
NG ("RR Door Courtesy Switch Status" is not normal)
|
C
|
B
|
|
|
2.
|
INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY LH
|
(a) Inspect the rear door courtesy light switch assembly LH.
for Hatchback: Click here
for Sedan: Click here
NG |
|
REPLACE REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY LH
for Hatchback: Click here
for Sedan: Click here
|
OK
|
|
|
3.
|
CHECK HARNESS AND CONNECTOR (REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY LH - POWER DISTRIBUTION BOX ASSEMBLY)
|
(a) Disconnect the 8H power distribution box assembly connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
O31-1 - 8H-18
|
Always
|
Below 1 Ω
|
O31-1 or 8H-18 - Body ground
|
Always
|
10 kΩ or higher
|
NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR
|
OK
|
|
|
4.
|
INSPECT POWER DISTRIBUTION BOX ASSEMBLY
|
(a) Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly.
Click here
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
8H-18 - MB-6 (LCTY)
|
Always
|
Below 1 Ω
|
5.
|
INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY RH
|
(a) Inspect the rear door courtesy light switch assembly RH.
for Hatchback: Click here
for Sedan: Click here
NG |
|
REPLACE REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY RH
for Hatchback: Click here
for Sedan: Click here
|
OK
|
|
|
6.
|
CHECK HARNESS AND CONNECTOR (REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY RH - POWER DISTRIBUTION BOX ASSEMBLY)
|
(a) Disconnect the 8H power distribution box assembly connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
O34-1 - 8H-27
|
Always
|
Below 1 Ω
|
O34-1 or 8H-27 - Body ground
|
Always
|
10 kΩ or higher
|
NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR
|
OK
|
|
|
7.
|
INSPECT POWER DISTRIBUTION BOX ASSEMBLY
|
(a) Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly.
Click here
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
8H-27 - MB-1 (RCTY)
|
Always
|
Below 1 Ω
|
|