Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000028D6Q |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [11/2022 - 08/2023] |
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model with Electric Parking Brake System): C050C1C; Left Rear Wheel Speed Sensor Circuit Voltage Out of Range; 2023 MY Corolla Corolla Hatchback GR Corolla [11/2022 - 08/2023] |
DTC
|
C050C1C
|
Left Rear Wheel Speed Sensor Circuit Voltage Out of Range
|
DESCRIPTION
Refer to DTC C050C12
Click here
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C050C1C
|
Left Rear Wheel Speed Sensor Circuit Voltage Out of Range
|
-
When the vehicle is being driven in a straight line at a speed of 20 km/h (12 mph) or more and VSC/TRAC has permission to control vehicle braking, one of the following conditions is met when the difference between the highest wheel speed and the lowest wheel speed is 6% or more*1 for between 9 and 72 seconds or more (period changes depending on vehicle conditions):
-
When the difference between the highest wheel speed and the second highest wheel speed is 5 km/h (3 mph) or more, the wheel speed is high compared to other speed sensors.
-
The value of the wheel speed is continuously the slowest.
-
When the wheel speed is less than 5 km/h (3 mph).
-
When the vehicle speed is less than 100 km/h (62 mph), one of the following conditions is met when the difference between the highest wheel speed and the lowest wheel speed is 6 km/h (4 mph) or more*2 for between 9 and 72 seconds or more (period changes depending on vehicle conditions):
-
When the difference between the highest wheel speed and the second highest wheel speed is 5 km/h (3 mph) or more, the wheel speed is high compared to other speed sensors.
-
The value of the wheel speed is continuously the slowest.
-
When the wheel speed is less than 5 km/h (3 mph).
-
When the vehicle speed is 100 km/h (62 mph) or more, one of the following conditions is met when the difference between the highest wheel speed and the lowest wheel speed is 6% or more*1 for between 9 and 72 seconds or more (period changes depending on vehicle conditions):
-
When the difference between the highest wheel speed and the second highest wheel speed is 5 km/h (3 mph) or more, the wheel speed is high compared to other speed sensors.
-
The value of the wheel speed is continuously the slowest.
-
When the wheel speed is less than 5 km/h (3 mph).
|
-
Rear speed sensor LH (rear axle hub and bearing assembly LH)
-
Rear speed sensor rotor LH (rear axle hub and bearing assembly LH)
-
Speed sensor installation
-
Tire wear
-
Tire pressure
-
Tire and wheel size
|
*1: When more than 1 wheel has a wheel speed of less than 5 km/h (3 mph), a difference of 15% is permitted.
*2: When more than 1 wheel has a wheel speed of less than 5 km/h (3 mph), a difference of 16 km/h (10 mph) is permitted.
CAUTION / NOTICE / HINT
NOTICE:
DTC precaution
Click here
Procedure to clear warning lights (When not clearing DTCs)
Procedure
|
-
Repair or replacement.
-
Turn the ignition switch to ON.
-
Drive the vehicle at 11 km/h (7 mph) or more for 1 second or more to clear the warning lights.
|
PROCEDURE
(a) Check that all 4 tires are of correct size, are inflated to the correct pressure, and do not show excessive signs of wear.
Click here
HINT:
If a tire is deformed or an incorrectly sized tire or wheel is installed, this DTC may be stored.
NEXT
|
|
|
2.
|
CHECK FREEZE FRAME DATA (WHEEL SPEED)
|
(a) Connect the GTS to the DLC3.
(b) Turn the ignition switch to ON.
(c) Enter the following menus: Chassis / Brake/EPB / Trouble Codes.
(d) Select a DTC to display the Freeze Frame Data.
(e) Read the freeze frame data of DTC C050C1C.
Chassis > Brake
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
FR Wheel Speed
|
Front wheel speed sensor RH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
FL Wheel Speed
|
Front wheel speed sensor LH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
RR Wheel Speed
|
Rear wheel speed sensor RH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
RL Wheel Speed
|
Rear wheel speed sensor LH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
Chassis > Brake > DTC(C050C1C) > Freeze Frame Data
Tester Display
|
FR Wheel Speed
|
FL Wheel Speed
|
RR Wheel Speed
|
RL Wheel Speed
|
Result
|
Proceed to
|
The value of RL Wheel Speed is more than all other values.
|
A
|
The value of RL Wheel Speed is less than all other values.
|
B
|
The value of RL Wheel Speed is less than 5 km/h (3 mph).
|
C
|
A
|
|
|
3.
|
READ VALUE USING GTS (WHEEL SPEED)
|
(a) Connect the GTS to the DLC3.
(b) Turn the ignition switch to ON.
(c) Enter the following menus: Chassis / Brake/EPB / Data List.
Chassis > Brake > Data List
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
FR Wheel Speed
|
Front wheel speed sensor RH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
FL Wheel Speed
|
Front wheel speed sensor LH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
RR Wheel Speed
|
Rear wheel speed sensor RH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
RL Wheel Speed
|
Rear wheel speed sensor LH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
Chassis > Brake > Data List
Tester Display
|
FR Wheel Speed
|
FL Wheel Speed
|
RR Wheel Speed
|
RL Wheel Speed
|
(d) Start the engine.
(e) Perform a road test under the same malfunction conditions recreated based on the Freeze Frame Data or customer problem analysis.
(f) Check the value of Wheel Speed.
OK:
The difference between the value of RL Wheel Speed and all other values is less than 6%.
HINT:
If the result of the road test is within the specified range, it is possible that this DTC was stored due to a particular situation such as wheelspin.
NG |
|
REPLACE REAR AXLE HUB AND BEARING ASSEMBLY LH
for Double Wishbone Type Suspension: Click here
for Torsion Beam Type Suspension: Click here
|
4.
|
READ VALUE USING GTS (WHEEL SPEED)
|
(a) Connect the GTS to the DLC3.
(b) Turn the ignition switch to ON.
(c) Enter the following menus: Chassis / Brake/EPB / Data List.
Chassis > Brake > Data List
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
FR Wheel Speed
|
Front wheel speed sensor RH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
FL Wheel Speed
|
Front wheel speed sensor LH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
RR Wheel Speed
|
Rear wheel speed sensor RH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
RL Wheel Speed
|
Rear wheel speed sensor LH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
Chassis > Brake > Data List
Tester Display
|
FR Wheel Speed
|
FL Wheel Speed
|
RR Wheel Speed
|
RL Wheel Speed
|
(d) Start the engine.
(e) Perform a road test under the same malfunction conditions recreated based on the Freeze Frame Data or customer problem analysis.
(f) Check the value of Wheel Speed.
OK:
The difference between the value of RL Wheel Speed and all other values is less than 6%.
HINT:
If the result of the road test is within the specified range, it is possible that this DTC was stored due to a particular situation such as brake drag.
NG |
|
REPLACE REAR AXLE HUB AND BEARING ASSEMBLY LH
for Double Wishbone Type Suspension: Click here
for Torsion Beam Type Suspension: Click here
|
5.
|
READ VALUE USING GTS (RL WHEEL SPEED)
|
(a) Connect the GTS to the DLC3.
(b) Turn the ignition switch to ON.
(c) Enter the following menus: Chassis / Brake/EPB / Data List.
Chassis > Brake > Data List
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
RL Wheel Speed
|
Rear wheel speed sensor LH reading
|
Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph)
|
Vehicle stopped: 0.0 km/h (0.0 mph)
|
When driving at constant speed: No large fluctuations
|
Chassis > Brake > Data List
Tester Display
|
RL Wheel Speed
|
(d) Start the engine.
(e) Perform a road test under the same malfunction conditions recreated based on the Freeze Frame Data or customer problem analysis.
(f) Check the value of RL Wheel Speed.
OK:
The value of RL Wheel Speed is 5 km/h (3 mph) or more.
HINT:
If the result of the road test is within the specified range, it is possible that this DTC was stored due to a particular situation such as wheelspin, brake drag or wheel lockup.
When a DTC is stored during operation of ABS or TRAC, the system also stores vehicle control history (RoB) that can be guessed the vehicle conditions.
Click here
NG |
|
REPLACE REAR AXLE HUB AND BEARING ASSEMBLY LH
for Double Wishbone Type Suspension: Click here
for Torsion Beam Type Suspension: Click here
|
|