Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM10000000289UY |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [11/2022 -
] |
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: B009B85; Left Side Restraints Sensor 5 Signal Above Allowable Range; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ] |
DTC
|
B009B85
|
Left Side Restraints Sensor 5 Signal Above Allowable Range
|
DESCRIPTION
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
Warning Indicate
|
DTC Output from
|
Priority
|
Test Mode / Check Mode
|
B009B85
|
Left Side Restraints Sensor 5 Signal Above Allowable Range
|
-
Side airbag pressure sensor LH malfunction
-
Airbag sensor assembly malfunction
|
-
Side airbag pressure sensor LH
-
Airbag sensor assembly
|
Comes on
|
SRS Airbag
|
A
|
Does not apply to test/check mode
|
WIRING DIAGRAM
Click here
CAUTION / NOTICE / HINT
PROCEDURE
Pre-procedure1
(a) Turn the ignition switch off.
|
|
*1
|
Side Airbag Pressure Sensor RH
|
*2
|
Airbag Sensor Assembly
|
*3
|
Wire Harness
|
|
|
(b) Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 60 seconds.
(c) Interchange the side airbag pressure sensor LH with RH and connect the connectors to them.
(d) Connect the cable to the negative (-) auxiliary battery terminal, and wait for at least 2 seconds.
(e) Turn the ignition switch to ON, and wait for at least 60 seconds.
Procedure1
(f) Clear the DTCs stored in memory.
Body Electrical > SRS Airbag > Clear DTCs
Post-procedure1
(g) Turn the ignition switch off.
NEXT
|
|
|
2.
|
CHECK SIDE AIRBAG PRESSURE SENSOR LH
|
Pre-procedure1
(a) Turn the ignition switch to ON, and wait for at least 60 seconds.
Procedure1
(b) Check for DTCs.
Body Electrical > SRS Airbag > Trouble Codes
Result
|
Proceed to
|
B009B85 is output
|
A
|
B009E85 is output
|
B
|
B009B85 and B009E85 are not output
|
C
|
HINT:
Codes other than DTCs B009B85 and B009E85 may be output at this time, but they are not related to this check.
Post-procedure1
(c) Turn the ignition switch off.
(d) Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 60 seconds.
(e) Return the side airbag pressure sensor RH and LH to their original positions and connect the connectors to them.
|