Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM10000000289UF |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [11/2022 -
] |
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: B009096; Left Frontal Restraints Sensor Component Internal Failure; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 - ] |
DTC
|
B009096
|
Left Frontal Restraints Sensor Component Internal Failure
|
DESCRIPTION
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
Warning Indicate
|
DTC Output from
|
Priority
|
Test Mode / Check Mode
|
B009096
|
Left Frontal Restraints Sensor Component Internal Failure
|
-
Front airbag sensor LH malfunction
-
Airbag sensor assembly malfunction
|
-
Front airbag sensor LH
-
Airbag sensor assembly
|
Comes on
|
SRS Airbag
|
A
|
Does not apply to test/check mode
|
WIRING DIAGRAM
Click here
CAUTION / NOTICE / HINT
PROCEDURE
Pre-procedure1
(a) Turn the ignition switch off.
|
|
*1
|
Front Airbag Sensor RH
|
*2
|
Airbag Sensor Assembly
|
*3
|
Wire Harness
|
|
|
(b) Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 60 seconds.
(c) Interchange the front airbag sensor LH with RH and connect the connectors to them.
(d) Connect the cable to the negative (-) auxiliary battery terminal, and wait for at least 2 seconds.
(e) Turn the ignition switch to ON, and wait for at least 60 seconds.
Procedure1
(f) Clear the DTCs stored in memory.
Body Electrical > SRS Airbag > Clear DTCs
Post-procedure1
(g) Turn the ignition switch off.
NEXT
|
|
|
2.
|
CHECK FRONT AIRBAG SENSOR LH
|
Pre-procedure1
(a) Turn the ignition switch to ON, and wait for at least 60 seconds.
Procedure1
(b) Check for DTCs.
Body Electrical > SRS Airbag > Trouble Codes
Result
|
Proceed to
|
B009096 is output
|
A
|
B009596 is output
|
B
|
B009096 and B009596 are not output
|
C
|
HINT:
Codes other than DTCs B009096 and B009596 may be output at this time, but they are not related to this check.
Post-procedure1
(c) Turn the ignition switch off.
(d) Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 60 seconds.
(e) Return the front airbag sensor RH and LH to their original positions and connect the connectors to them.
|