Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000027J3Q
Model Year Start: 2023 Model: Corolla Hatchback Prod Date Range: [09/2022 - 11/2022]
Title: PARKING BRAKE: PARKING BRAKE CABLE (except G16E-GTS): REMOVAL; 2023 MY Corolla Corolla Hatchback Corolla HV [09/2022 - 11/2022]

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • The following procedure is for the No. 1 parking brake cable assembly and No. 3 parking brake cable assembly.
  • Use the same procedure for the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly.

PROCEDURE

1. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; PARKING BRAKE: PARKING BRAKE LEVER: REMOVAL

2. REMOVE PARKING BRAKE CABLE END STOPPER

(a) Disengage the 2 claws to separate the No. 1 parking brake cable assembly from the parking brake cable end stopper.

(b) Disengage the 2 claws to remove the parking brake cable end stopper and No. 1 parking brake cable assembly from the parking brake equalizer.

3. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the No. 1 wire adjusting nut.

(b) Pull up the parking brake lever sub-assembly claw.

NOTICE:

Do not damage the No. 1 parking brake cable assembly.

(c) Remove the No. 1 parking brake cable assembly from the parking brake lever sub-assembly.

4. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Front and Rear Catalyst)

Click here 2020 - 2023 MY Corolla [01/2019 - 11/2022]; 2ZR-FAE (INTAKE / EXHAUST): EXHAUST PIPE: REMOVAL

5. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR

(a) Remove the 3 nuts and front No. 1 floor heat insulator.

6. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR

(a) Remove the 4 clips.

*a

Nut

*b

Clip

(b) Remove the 2 nuts and front No. 2 floor heat insulator.

7. REMOVE PARKING BRAKE LEVER PROTECTOR

(a) Remove the parking brake lever protector from the No. 3 parking brake cable assembly.

8. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the 4 bolts and nut, and separate the No. 3 parking brake cable assembly.

(b) Pull out the No. 3 parking brake cable assembly to the outside of the vehicle body.

(c) Separate the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

(d) Disengage the clip and remove the No. 3 parking brake cable assembly.

*1

Rear Disc Brake Cylinder Assembly

*a

Clip